0

I'm trying to figure out how to use the auxiliary sends and returns on Jeskola Buzz which is the worst documented piece of software I have ever used (although that gives me that feeling of exploring unknown territory that I love).

I have set it up as shown in the picture bellow.

Aux test on Jeskola Buzz I have a synth (Qsamo, receiving MIDI) going to the master (just to check it's working prior to testing the aux) and also going to the AuxSend machine. An Aux return machine is connected to Master.

I would expect there is some way of connecting the Aux send to the return since you can have multiple instances but the program does not allow me to draw a wire and I haven't found anything in the menus. In addition, the program won't allow me to connect an effect to the aux return.

How do I connect them?

OR

If I'm using these machines wrong, what is the proper way to use them?

P.S. The program itself gives many alternatives like sending multiple sources to an effect and returning the effect to master but I get a feeling that I'm missing something here.

Improve this question

2 Answers 2

Reset to default
1

I did a quick 'google' on the subject and found this, (I think this will be more use to you than my original answer)......

http://forums.jeskola.net/viewtopic.php?f=2&t=1015

Improve this answer
1
  • Ah. Thanks. It appears the aux machine didn't even work in the first place. No wonder I couldn't get it to work.
    – Schizomorph
    Commented Aug 30, 2017 at 11:40
0

This may be totally wrong, but I have 'fiddled' with Buzz in the past, so.... The AuxSend module is a 'Control', (Top RH corner of module image.) This should allow you to control the %age of the signal, (from Qsamo, which is a 'Generator'), that is sent through to an Effect. The oddly named 'AuxReturn' is a Generator, which is why you cannot connect through. (Delete it if it is of no other use). Drag an Effect onto the screen, (Echo for instance), and then try to connect the AuxSend to it - it should connect then, (I think :-/!!). Right-click AuxSend, and some controls for the Send should pop up? Again, I think, you can then drag a connection from the Effect through to the Master. If it wont connect, try putting a Mixer onto the screen, and dragging a connection from the Effect to the Mixer, and then connect the Mixer to the Master...... As I said, I may be wrong, but it's something like this. Hope it helps :)

Improve this answer
1
  • I'm afraid that didn't work. I was still unable to connect AuxSend to anything. I'm starting to suspect I need to use the console to connect them.
    – Schizomorph
    Commented Aug 20, 2017 at 11:25

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.