Timeline for Mass producing a video that has one change in audio per unit.
Current License: CC BY-SA 2.5
8 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Feb 25, 2011 at 18:28 | comment | added | Steve Urban | @VCProd I have the good fortune of having a D-Command at work and a Command8 at home, although I still tweak a breakpoint by mouse occasionally... | |
| Feb 25, 2011 at 14:55 | comment | added | VCProd | @Steve curious - do you use an external interface for your mixing control, or is is it all mouse+software? | |
| Feb 24, 2011 at 22:03 | comment | added | Steve Urban | @Utopia- If you're laying back to tape, change the offset in Session Setup under External Time Code Offsets. It's a lot easier than having to re-arrange your whole timeline. | |
| Feb 24, 2011 at 21:35 | comment | added | Utopia | There is one drawback in that each one will be off when we go to lay it back to video but I can just re-set my timecode session start or move the mix to 1 hour each time. This works a lot better. | |
| Feb 24, 2011 at 21:24 | comment | added | Steve Urban | No prob @Utopia, hope it helps others too. | |
| Feb 24, 2011 at 21:15 | comment | added | Utopia | Dear Steve, I totally should have thought of going later on the timeline. Thank you for the tip - very very helpful! | |
| Feb 24, 2011 at 21:13 | vote | accept | Utopia | ||
| Feb 24, 2011 at 20:13 | history | answered | Steve Urban | CC BY-SA 2.5 |