Tag Info

It is sometimes possible, but not advisable, to transmit from a wireless audio transmitter designed by one manufacturer, to a wireless audio receiver made by a different manufacturer. Cross-manufacturer compatibility is much, much more likely to succeed when both transmitter and receiver are analog wireless ("FM"), and much less likely to succeed when both ...

Some receivers will be compatible with transmitters from other manufacturers but this is generally not a common case. For example, Lectrosonics receivers can receive audio from Sennheiser G3 series transmitters if using the correct modulation mode. It has to be said though, this is not usually the case and you should follow the general rule that you should ...

Stack Exchange generally doesn't like multiple questions, however, as these are all pretty tightly related... Q1. Would XLR to Bluetooth transmitter work for this ? A1. For a given definition of 'work' yes. You may not get the best sound & you may suffer latency [delay between mic & phone] & signal drop-outs. Q2. Or, do I need phantom power in ...

You need an audio interface. Check out “Roland”or “IK Multimedia” or “Rode” or “Apogee” for suitable interfaces. The mic is dynamic so doesn’t require phantom power.

Yes, this is possible. It's unfortunately not straight-forward, nor will it be cheap, but it is do-able - except not via USB. I can give you one example of having done this myself, but you're not going to like the answer - becuase it's particularly pricey - but remember, this is just one example. Sound Devices 970, MADI/DANTE recorder. RME MadiFACE in the ...