1

For an application such as this, I think that measurement of the pulse width can be somewhat arbitrary as long as you are measuring all pulses in the same way. For instance, pulses of 200ms or longer should be measured using the same methodology as shorter pulses. This could be either to measure the start of the pulse being the first audio sample in the ...


1

The comments to my question helped me troubleshoot until I found the culprit. I forget to mention in the OP that I also used a 6-foot 3.5 mm extension cable, since the monitors’ RCA cable didn’t reach on its own. I just did some testing, and trying the RCA cable without the extension eliminated the background hum, and presumably the pops as well. I’m now ...


1

Does the sound go away when you mute your problem mic? Here are some things I would try: If it goes away when muted, it is likely RF interference so please move your receiver away from speakers and radios. You can also adjust the squelch level on your microphone to reduce RF levels when not in use. If it doesn't go away when muted, please try another ...


Only top voted, non community-wiki answers of a minimum length are eligible