4
If you use or have access to a mac, Similarity should be able to help with this. The free version may be sufficient for your needs.
From the site:
Similarity rapidly scans your music collection and shows all duplicate
music files you may have. The comparison powered by "acoustic
fingerprint" technology considers the actual contents of files, not
...
4
How is your coding? You could put together this functionality using an acoustic fingerprint library such as http://acoustid.org/chromaprint
3
You are probably trying to connect passive speakers to line out level outputs, therefore the low acoustic level.
What you need is a four channels power amplifier with 4 ohms speakers outputs.
3
I've had decent luck experimenting with making a "distant" sound with just processing:
A bit of lowpass filter (not too aggressive, but obvious enough) to dull it, and leave other sounds in the mix more prominent.
Reverb with a semi-long initial decay and dense reflections. The idea is to suggest that there was plenty of space between the sound and the ...
2
I helped answer your last question as well, and nothing is wrong with your setup.
I understand your confusion, but take from this that +27dBu definitely does not mean you are outputting +27dB. The dBu numbers correspond to the nominal operating level of your equipment, and in the pro audio world -10dBu devices require more gain to reach the same nominal ...
2
Audio files are essentialy arrays (or vectors) of numeric values. If the audio files are uncompressed, the short audio file should exactly match a sequence of values within the long audio file. That means you could use tools like Matlab, Octave, Python (with modules) etc. to read in the audio as an array-like data type and then use provided functions to ...
1
You need to use EQ/Equalization on the dry voice and boost resonant frequency with a narrow notch filter. It might match closer if you then apply a basic reverb afterward, but it will take some trial and error.
The important thing about modal frequencies is that practically they are just a higher amplitude of that frequency. If you can identify one or two ...
1
Great answers so far. I suppose if you have the chance to Worldize it that might be worth a go too!
1
Command + Option + Up or Down Arrows will scroll through available mics / channels here.
I'm on PT 10.3.5 (OSX)
Only top voted, non community-wiki answers of a minimum length are eligible
Related Tags
matching × 10adr × 2
audio-recording × 1
audio × 1
mixing × 1
field-recording × 1
pro-tools × 1
speakers × 1
editing × 1
techniques × 1
amplifier × 1
reverb × 1
equalization × 1
setup × 1
wav × 1
zoom × 1
mix × 1
plugins × 1
echo × 1
line-level × 1
osx × 1
room × 1
track × 1
adobe × 1
linux × 1