All Questions

Filter by
Sorted by
Tagged with
0 votes
1 answer
13 views

How can I connect an active subwoofer to my mixer recording set-up?

I have a Kustom 7250 I bought from a church that I am connecting to my Seinburg interface that is connected to my Acer desktop computer. I have 2 passive speakers, a small fender amp I am using as a ...
Char's user avatar
  • 1
0 votes
0 answers
14 views

How to merge two Bluetooth audio into one? [closed]

I work in a very loud factory and I need to wear bluetooth earplugs the whole day to receive order from the manager speaking from a walkie-talkie. The orders transmitted are not very frequent (approx. ...
aQ9's user avatar
  • 1
0 votes
1 answer
21 views

"frame" terminology as used in Veed

Question is specific to how Veed.io uses the word "Frame". In its upload link after uploading there is a settings button at the lower bottom left where you can adjust Frames Per Second. ...
Pacerier's user avatar
  • 101
0 votes
0 answers
40 views

A filter to remove dynamic F0 and lower harmonics

I'm studying the perception of vowel formants and need to create stimuli where the signal below the first formant is removed. I have some naturalistic vowels (also a requirement for this study) which ...
Renata Koch's user avatar
0 votes
1 answer
59 views

How to track/record infrasound

Not sure whether this is the right place, but we've recently in our house been aware of what feels like an ultra low frequency infrasound. It's almost like an engine idling, you don't so much hear it ...
Simon's user avatar
  • 1
0 votes
0 answers
15 views

Higher-than-standard EBU R128 integrated loudness target?

Task at hand I'm mostly a layman as it relates to sound design, but I have a library of workout songs that I'm "normalizing" such that some songs aren't louder than others. For that I'm ...
TrisT's user avatar
  • 101
0 votes
0 answers
12 views

Animation VO rig build from scratch

I'm Tom I'm based in the UK, this is my first time posting here, so please go easy on me if I come across like I'm asking a dumb question, because if you don't ask etc. A local college (not a ...
Tom Dixon's user avatar
0 votes
0 answers
30 views

How can I make my friend's electric violin sound even more electric (almost like a synth)? (example sound provided)

I have a friend who owns a Yamaha YEV-5 5-string electric violin. Example unedited sound here: He wants to figure out the effects to make it sound practically synth-like,...
Boloar's user avatar
  • 53
0 votes
0 answers
14 views

What's the best MP3 recorder to record MP3? [closed]

I use the following tools on different operating systems: Record MP3 on Windows: Joyoshare VidiKit, Audacity, Windows Voice Recorder Record MP3 on Mac: QuickTime, GarageBand Record MP3 on iPhone: ...
Yiliayoung's user avatar
0 votes
1 answer
31 views

Lemo connector parts for Sennheiser SK5212 body pack transmitter

I apologize if this question is off topic. I regularly repair DPA lav mics used for broadcast purposes. The failure is almost always that the mic cable shield has disintegrated right at the Lemo ...
Dwayne Reid's user avatar
0 votes
0 answers
18 views

BM-800 Microphone doesn't work well with PC

I've read three or four other posts here about that microphone, althought none seems to have progressed much beyond "my microphone doesn't work." The volume is very low on mine. I recognise ...
KDM's user avatar
  • 101
0 votes
0 answers
20 views

I want to listen to my keyboard through my interface without using a DAW and/or Audacity

I have a Juno-DS88 keyboard and a Motu M4 audio interface. Right now I have TRS cables connected from the outputs of my keyboard to the 1-2 inputs of my Motu interface. I also have cables connected ...
crate_smasher's user avatar
0 votes
0 answers
13 views

Creating FLACs: maximizing sound levels

I want to experiment with FLAC to see if my aging ears can tell the difference between that and highest-quality MP3. I have been using AudioGrabber for mp3, which does its encoding via LAME. A ...
Mark Colan's user avatar
0 votes
0 answers
15 views

Looking for custom cabling recommendations that can also provide circuitry & schematics [closed]

happy Friday! I’m looking for any input or recommendations of places that does custom cabling, including custom circuit electronic board/ schematics for the cable. Which types of specialists should I ...
mrintercomman's user avatar
0 votes
1 answer
29 views

Two inputs into one

The application here is a DJI (like GoPro) camera being used when motorcycle touring. We want the camera to record audio being received via a bike to bike comms system (Cardo Packtalk) as well as the ...
Carl Francis's user avatar
0 votes
0 answers
31 views

I have a 24 track recorder. I want software that will let me download my tracks and mix the prerecorded tracks

I use a ZOOM 24 track recorder for recording my music. I want to download these tracks to a DAW and make adjustments to the sound, pitch and add effects. I don’t need a lot of plug in instruments just ...
Robby's user avatar
  • 1
1 vote
1 answer
38 views

In what way, and to what degree, does a tear in a speaker cone affect its sound quality?

I just bought a used pair of Yamaha HS80M studio monitors for super cheap. They look like heck but I didn't see anything that worried me. I did test them briefly before purchasing and didn't hear ...
ibonyun's user avatar
  • 113
0 votes
1 answer
43 views

Using RODE lav mics

I have the RODE Pro kit and I've been experimenting. I think I can record a stereo interview onto my Android, but I'm not sure how to do it. I've tried Dolby On on the phone and actually recorded on ...
Rotten Robbie 87698's user avatar
0 votes
0 answers
17 views

Recreate James Blake "Retrograde" synth chorus opening

In Cubase, I want to recreate James Blake "Retrograde" synth chorus opening (starting at 1:36). To be precise - since there are several synths layered there - I specifically want this one (...
OfirD's user avatar
  • 101
4 votes
2 answers
71 views

Recording from Behringer X32 into Reaper captures only inputs, not channel outputs

I'm currently tasked with recording our school's musicals using a Behringer X32 digital mixer and Reaper as my recording software. However, I've encountered an issue where the recordings only capture ...
user39197's user avatar
0 votes
1 answer
84 views

Buzz/Humm noise when using long unbalanced connection with no load on one end

In my setup I'm using a music player connected to an audio mixer in an unbalanced connection that runs over 15m. In general I don't get too much noise, but when the player is unplugged from the cable (...
Aayla Secura's user avatar
0 votes
1 answer
23 views

New to sound design, how do I recreate Shining - Black Jazz drum tone using plugins?

I'm new to sound design and recording, having been a bedroom guitarist for many years now. I'd like to recreate a drum tone like the following band Shining - Black Jazz: https://shining.bandcamp.com/...
Antares2018's user avatar
0 votes
0 answers
23 views

Can you trust the sample rate of a recording?

Say for example your DAW (in this case ableton live) was set to 96khz, but the macos settings for the capture device were set to 44.1khz. Is there any chance the software would just spit out a file at ...
Acorn's user avatar
  • 141
0 votes
0 answers
19 views

How to configure a mac (Sonoma) to output to the speakers both audio from Spotify and from aux karaoke mic?

I'm planning for a karaoke party and we thought that we would use wireless mics to sing along to Spotify. But I'm worried about audio feedback loops, or MacOS software not allowing for split audio ...
Gabriel Fair's user avatar
0 votes
0 answers
13 views

How to unlink notes from each other?

I'm using Ableton Live 11. I've used the piano roll to create a bass line, but even though notes are (seemingly) unlinked from each other, the sound is played continuously and only its pitch changes ...
Spook's user avatar
  • 101
1 vote
1 answer
58 views

Tools for splitting audio tracks [closed]

I have a few vinyl records from which I decided to extract the content. So I bought a turntable with mp3 converter and "downloaded" all my vynils onto a a flash drive in mp3 format. However, ...
jmarkov's user avatar
  • 121
0 votes
1 answer
52 views

Can a sound wave be design by drawing?

Lets imagine that I have a simple sinusoidal wave form like this It is possible, to by design ended up. Like this : So that ended up having a new/different sound timbre? If it is possible, how this ...
Rodrigo Barboza's user avatar
1 vote
0 answers
13 views

How to Connect Bridging Input Transformer to MacBook Mic Input

I am very new to audio and need some guidance. I inherited a setup where there is a mic and speakers in a meeting hall, and the audio output from that system feeds into a bridging input transformer. I ...
Clifton Labrum's user avatar
0 votes
0 answers
23 views

Single narrator delineation between comment and response

I hope this is a proper forum for this question. If not, I would appreciate a pointer to a better place. I would like to volunteer to do some narration of articles that are essentially in a "...
Andrew's user avatar
  • 101
0 votes
0 answers
26 views

How to minimize sound latency when using virtual audio device on a Windows machine

I'm a newbie to working with sounds and I'm coding a VoIP-like system in Python using sounddevice and VB-Audio Cable, where two parties (a computer and a human) talk over the internet. What happens in ...
fittaoee's user avatar
0 votes
1 answer
17 views

TR-8 as master clock for eurorack system

I am trying to clock my eurorack with my TR-8. I have a 2-hp MIDI to CV/gate, which I feed with the MIDI out of my TR-8 (using a MIDI-to-USB cable as the 2-hp takes USB mini as input). I tried ...
MaximeMaurice's user avatar
0 votes
1 answer
24 views

Mini-Jack headphone extension without cutting sound

On my digital piano the headphone jack is at the back which is impractical. Is there any jack device that can be plugged without cutting the sound, for example with a switch, so I can pull an ...
Vladtn's user avatar
  • 103
0 votes
2 answers
44 views

Replacing old mic with new mic (Rode Wireless Pro) on Mackie mixer - volume is incredibly low on Rode?

I'm trying to connect a new microphone to an pre-existing mixer setup for a meeting room, and the volume is incredibly low no matter what I've tried. Photo of the existing setup: The mixer is a ...
victorhooi's user avatar
0 votes
0 answers
8 views

Wireless mic receiver in a flight case

I'm assembling a PA system that has to be portable, so I'm installing everything in flightcases. I have two Sennheiser EW100 G2 receivers, which have antennas on the back of the unit so the antennas ...
Hobbes's user avatar
  • 1,648
0 votes
0 answers
30 views

How can I recreate the synthesizer at the end of C418's Équinoxe?

I can't seem to wrap my head around on how to filter this thing. (If the embed doesn't work here is the link) https://drive.google.com/file/d/13-P3nJGq7TSTqDalsL3kK2HdabDBNz0T/view?usp=sharing
Based_gamer's user avatar
-1 votes
1 answer
49 views

Multi-line output from laptop to several speakers

I'd like to play many (currently up to eight, but possibly more in the future) distinct lines of audio from my laptop, and play each line from a separate speaker. The audio source is a Java program I'...
C0urante's user avatar
0 votes
0 answers
11 views

What do you use for setting loop points and crossfading? Do you know of an audio editor that lets you select the crossfade curve?

I'm trying to loop a sample so that I can sustain it on a sampler. I usually use Image-Line's Edison's "tune loop" tool but it doesn't always give me what I want. I was using the sampler in ...
stillsleep's user avatar
-2 votes
2 answers
101 views

How to make a tone that theoretically sounds like it's coming from infinitely far away?

Short Version Is there is an element of sound theory that quantifies how "far away" a sound seems to be coming from? And is there a way to maximize that value in a sythisized stereo signal? ...
user avatar
0 votes
1 answer
47 views

How do I take a song's music and convert into single notes for a looping 3D animation video

I have this sound track that I want converted into single notes so that it can fit with my 3D looping animation: I just want the whole track converted into notes without ...
Atharva Deodhar's user avatar
0 votes
0 answers
23 views

How can I make my coloured noise sound better?

I created some coloured noise using Python, and have outputted it as a .wav file. It works, it's definitely the correct sound, however when compared to other coloured noise sounds available on the ...
jjjj10001's user avatar
0 votes
0 answers
23 views

How do I build a speaker box?

I wanted to build an acoustic box for a woofer and a tweeter, and I wanted to knoe if anyone could guide me on how to make it. It is worth clarifying that it is translated with Google Translate ...
santiago palombo's user avatar
-1 votes
1 answer
15 views

Need Help Playing Voice Memo

I recorded a voice memo that 13+ hours long. It will only play the first 4 seconds. Can anyone help me?
Keri's user avatar
  • 1
1 vote
0 answers
37 views

Help Identifying a Noise

I'm trying to troubleshoot a buzz/static that I picked up in a recording session recently and am looking for either confirmation of my conclusion or other possibilities I haven't considered. I have ...
Square-Nerve's user avatar
0 votes
0 answers
31 views

3.5 mm microphone plugs- person with Parkinson's [duplicate]

I wonder if any of you can help me. I am attempting to help a lady with Parkinson's who needs to use a voice amplifier because of her very quiet voice. She has this amplifier https://voiceaid.net/, ...
Catherine's user avatar
0 votes
0 answers
24 views

Single Microphone System with PTT

I'm brand new to looking at audio/sound systems, so I'm starting scratch on this one. I'm looking at a project where I'd like to have a panel mount microphone that turns on with push-to-talk. Having ...
jordanat2012's user avatar
0 votes
0 answers
33 views

Difference between EC-3 with channel map and DD+JOC Atmos?

I've been playing with EC-3 encoder, trying to get "Dolby Atmos" audio code stream. My EC-3 code stream consist of 1 independent stream of 5 full-bandwith channels, and 1 dependent stream ...
DannyNiu's user avatar
  • 101
0 votes
0 answers
38 views

Behringer UMC202HD white noise

I just got a Behringer UMC202HD. Thing is there is white noise which is audible when I am plugging my guitar and having high gain on. I am wondering if that's normal for every interface, or should I ...
Islam Alsaadawy's user avatar
2 votes
3 answers
192 views

Difference between Level, Signal Strength, Amplitude and Volume?

It seems impossible to find a precise answer to this question. I researched for quite some time, but different sources come up with different definitions, that sometimes disagree or contradict with ...
MusicQuestions7's user avatar
0 votes
1 answer
82 views

How is the recorded sound of a galloping horse so much different from a trot or a canter?

I recently started getting interested in equestrianism after going on my first-ever horse-drawn carriage ride for the winter holiday season. In that ride, the horse was doing a characteristic trot and ...
HeavenlyHarmony's user avatar
0 votes
0 answers
21 views

Do common DAC USB interfaces fare well with DC in line inputs?

Do common pro DAC USB interfaces, I mean signal going from analog to digital input (TRS/XLR-input), in general, fare well, can they handle and take dc in line/xlr/instrument inputs? Specifically in ...
rantoniusw's user avatar

15 30 50 per page
1
2 3 4 5
202