Questions tagged [preamp]
The preamp tag has no usage guidance.
64
questions
0
votes
1
answer
66
views
Understanding microphone and recorder/preamplifier noise specifications
I am currently trying to understand the connections between microphone sensitivity, decibels, signal-to-noise ratio, bit depth, dynamic range, etc.
A picture from which I expect a lot to understand ...
1
vote
2
answers
227
views
Would I benefit from a preamp?
When does it make sense to use a pre-amp? I'm using the Shure SM57 with the Focusrite Scarlett Solo (3rd Gen) to record my podcast. This mic requires a lot of gain - I always have the gain on the ...
- 113
1
vote
2
answers
197
views
Acoustic guitar with 2 pickups, but no internal mixer: what to do to make it mono?
I have a custom Taylor Dan Crary guitar which has two pickups installed. One goes to the left, one to the right stereo channel.
One pickup is for the strings, the other for the body sounds (ie. ...
- 111
1
vote
0
answers
8
views
My Windows 10 PC isn't picking up any sound coming from my BM-800 Mic wired through my pre-amplifier [duplicate]
I bought a BM-800 Condenser Microphone
The Mic has a 3.5mm jack so I'm using an adaptor (3.5mm female to 6.5mm male)
I have it hooked up into the Mono 6.6mm jack of a Joseph MIX-278 Phono/Mic Pre-...
- 11
0
votes
0
answers
119
views
What kind of output does an active acoustic guitar pickup provide?
My kid has a Cort AD880 acoustic guitar with a built-in CE304T active ceramic pickup (amplifier and EQ). I failed to find any documentation about this piece of electronics, but connecting it to my ...
- 101
1
vote
2
answers
72
views
Any recommendations for replacing a 20-year-old Korg digital audio workstation?
I bought a Korg D1200 20 years ago for recording 4-part acapella vocals. While it has done me well, it is always a bit of a chore getting used to the quirky UI after a spell away from it, and getting ...
- 113
0
votes
1
answer
423
views
set up Audio-Technica AT-LP140XP [closed]
I want to buy an "Audio-Technica AT-LP140XP". I saw that this turntable did not have a "preamp" so I imagine that you have to buy one too.
I have only theoretical knowledge in this ...
- 103
1
vote
0
answers
43
views
Surprising issues with a Shadow 4020 preamp
I have a Faith guitar which came with a Shadow 4020 preamp fitted. The preamp worked beautifully for a few years, but at some point over the last year (I think!) it started to misbehave. Specifically, ...
- 111
0
votes
1
answer
763
views
How to determine cause of white noise with new microphone/preamp?
I've been meaning to start making videos of covers of songs with vocals and acoustic guitar, so i purchased a Shure M58 microphone with a blue icicle XLR-USB. My Laptop is a macbookpro with touchbar ...
1
vote
1
answer
980
views
How to set mic input levels on ART Tube MP Studio V3
I'm setting up a small studio to do live streaming and podcasting and need some advice on how to properly setup my mic levels on my preamp. It's an ART Tube MP Studio V3 and the microphone levels can ...
- 113
0
votes
2
answers
213
views
Line inputs and sound quality
Ive been recording my guitar from the line out of a two notes captor into the line in of my presonus audiobox itwo via a trs cable.
I'm not 100% happy with what I am hearing as it sounds like the ...
2
votes
2
answers
458
views
Software equivalents for the high end hardware microphone pre amps
Is there an (affordable) software version of a microphone preamp (such as the world class but unaffordable avalon 737 specifications) that allows my (phantom powered) nararted voice audio recordings ...
- 223
0
votes
0
answers
373
views
iRig Pre and Huawei P8 Lite 2017 compatibility
I'd like to purchase an iRig Pre XLR microphone interface for recording pre-production ideas out in the field.
I'm wondering if anyone has tried this on a Huawei P8 Lite 2017?
I can see that it's ...
- 768
5
votes
2
answers
454
views
How do I improve the Signal to Noise Ratio of low level signals?
I'm recording breathing sounds (inside anechoic chamber) with a MEMS microphone in a custom housing. The sound level is low; and near the noise floor of the mic, so we have a lot of input gain and ...
-1
votes
1
answer
27
views
For my specific purpose (1 mic, hiphop vocals only), will one of these preamps give a better sound?
Looking at the new Presonus Quantum 2 at $700. Since I'm just using one mic (TLM 102) and laying down vocals, is there an advantage to getting that over their lower end modals, such as their Studio 6|...
0
votes
1
answer
139
views
Do I need one preamp for each microphone
Im looking for a usb interface for recording some jam sessions. So I want a usb interface where I can put 8 Microphones (for drums, guitars, bass and voice).
My question is do I need a preamp for ...
- 1
0
votes
1
answer
4k
views
How to connect dbx 286s and dbx 266xs to Behringer DX2000USB Mixer
This is my first question here. Thank you for your help! Much appreciated!
I run a small online EDM radio station on a Mac mini running Radiologik DJ and NiceCast and I have been using the Behringer ...
1
vote
1
answer
527
views
Connecting two dynamic microphones to one preamp
Our podcast recording setup is a Behringer multitrack mixer with 4 preamps and we have 5 microphones. I have made peace with the fact that two microphones will have to occupy the same track. How would ...
- 127
1
vote
3
answers
1k
views
Combining several inputs to a single headphone output?
I use in-ears on stage and was wondering if there are any headphone amps that support several inputs to a single output?
Input 1 (jack)
Input 2 (jack)
Output 1 (jack)
Basically my end game is that I ...
- 113
2
votes
1
answer
210
views
Low/distorted signals from headworn microphone
I'm producing a podcast with several speakers in the same room. I'm also a complete novice when it comes to audio engineering.
The Original Setup
Originally we used a Yeti microphone set to '...
- 21
4
votes
6
answers
5k
views
Rode SmartLav+ does not work with Scarlett 2i2
I try to use my Rode SmartLav+ with Scarlett 2i2 USB pre-amp. I already bought Rode SC3 adaptor and small jack to big jack adaptor. I try to use any of the line/instrument inputs on my pre-amp, but it ...
- 147
1
vote
2
answers
968
views
Get mics to line level in the field
I'm new to field recording and I have a 744t, but channels 3&4 have to be line in. So if I want 4 mic channels, let's say Rode NT4 on 1&2 and Line Audio CM3 on 3&4, I need to get the 3&...
- 113
0
votes
1
answer
164
views
Playing MP3/AAC music on powered loudspeaker [closed]
I have a Mackie Thump15 15-Inch powered loudspeaker that I want to be able to play music from my iTunes library on. The speaker has active amplification and has a mic and line input. I read that I can ...
- 103
1
vote
2
answers
2k
views
Practical difference between channel gain, fader and amp gain
Why do channel gain, fader and amp gain all seem to affect the sound differently, particularly when it comes to feedback? Is this just a placebo effect? Is it a symptom that something is connected ...
- 111
1
vote
2
answers
411
views
Unbalanced Line Level vs Balanced Microphone Level [closed]
So, I'm trying to digitise some vinyls. I have a big amplifier, and I might just use the preamp in that, but I might instead get the Radial J33. The Radial J33 is a phono preamp, but it has both RCA ...
- 113
1
vote
3
answers
230
views
Microphone preamplifier for live stereo recording
I'm looking for a simple, compact, high quality but reasonably priced 2-channel microphone preamplifier. I will use the preamp with a stereo microphone with two phono connectors so the inputs need to ...
- 111
2
votes
1
answer
268
views
Neumann RSM-191 - Can I use a Sound Devices 302 as a substitute for the MTX Box?
I've found a good deal on a Neumann RSM-191 stereo shotgun. It's just the mic alone - no cables or the proprietary MTX preamp box.
Since the 302 mixer can do M/S decoding, could I just use that in ...
- 21
2
votes
1
answer
2k
views
How do I add 3V plug in power to a 3.5mm lavalier microphone?
I'm trying to hook a cheap lavalier microphone to a Behringer HA400 micro preamp. The input line does not provide any power to the microphone.
The microphone works fine when powered by a sound card ...
- 121
2
votes
1
answer
162
views
Level difference between 2 AKG CK91 capsules
I have recently borrowed two AKG SE300B preamps from a friend each with a AKG CK91 capsule.
The two CK91 capsules seem to have a difference in level of about 6db, which seems quite a lot to me.
I ...
- 23
0
votes
3
answers
671
views
What are the audible consequences of preamp impedance mismatch?
When working with outboard effects, microphones, preamps etc. the impedance may vary and some combinations may have a bad influence on the signal/operation of the equipment.
Consider the following ...
- 3,772
3
votes
1
answer
577
views
Low audio levels with AT875R shotgun microphone. Is this due to missing a preamp/mixer and/or other hardware?
Background:
I recently decided to move away from my AT2020 USB microphone and jump on the next tier up— AT875R Shotgun microphone. I like the fact it'll be more directional, won't need to be directly ...
- 133
3
votes
3
answers
2k
views
How can I avoid the self-noise of Electro-Voice RE-20 microphone?
I use my dynamic RE20 mic with Focusrite 2i4 preamp/USB-interface.
I have some noticeable hiss with this setup.
The least noise I can get is when the gain knob is on maximum (which is not what you ...
1
vote
2
answers
107
views
What cables for electric bass+preamp+pc?
I wan't to record a bassline using my PC.
I have a passive electric bass, a behringer mic100 preamp, and a PC with soundcard emu 0404 PCI.
What audio cables do i need for Bass->Preamp and Preamp->PC?
...
- 11
0
votes
1
answer
81
views
Testing low-end turntable performance [closed]
I've found an old low end turntable on a garage sale, and I was trying to get it to work with some of my LPs. It's an AKAI AP-M393, very low end and very basic.
I've realised I need a phono preamp ...
- 103
2
votes
1
answer
1k
views
Preamp for Sony ECM MS907 mic
I'm pretty new in the audio world, I'll try the best I can to explain.
I recently bought a Sony ECM MS907, a capacitor microphone with the idea to do some voice recording and maybe music.
At first, ...
- 21
2
votes
0
answers
260
views
Sound Devices 744t - Preamp / Self noise or Mic?
Recently purchased a used Sound Devices 744t and have been very impressed with it in general, however as purchased 2nd hand I have had some minor worries about it (most of which are probably unfounded)...
- 61
1
vote
2
answers
573
views
Pre-amp/Mixer or USB Interface for vocals?
I am a newbie to studio recording (voice artist) . I have decided to purchase a condenser mic for my recording (audiotechnica). However, I am confused as to whether I should purchase a Pre-amp/Mixer ...
- 141
0
votes
2
answers
122
views
obviate extreme gain noise
Anyone knows about the lack of preamps to provide extreme gain setups? Even my sound devices 702 gets very noisy at the end of the gain range. Today i stumbled across this little device. It's a pre-...
- 152
1
vote
2
answers
9k
views
How do I know if I need a microphone preamp?
I don't often record with microphones (mostly with synthesizers patched directly to an audio interface, or in-computer with virtual synths). However when I do, I've never been very happy with the ...
- 385
-1
votes
1
answer
169
views
How do I run this setup?
I have an Audio-Technica AT2035 Cardioid Capacitor Microphone with an ART Tube amp. The mic has a Low Cut switch and an -10db to 0dB switch. The preamp has 2 dials: Input and Output, along with 4 ...
2
votes
2
answers
11k
views
Mic input vs Instrument input
I just got a Focusrite iTrack Solo.
This has two inputs. One has an XLR jack and one has a TRS jack.
It appears that the idea was that you would use the XLR jack for a mic and the TRS jack for an ...
- 953
4
votes
3
answers
1k
views
USB power enough for a Mic preamp?
I've seen some vague claims that an XLR microphone-to-usb that's powered solely by USB will necessarily sound worse than one powered by a separate power source (a wall wart) because the preamp will ...
- 953
0
votes
4
answers
897
views
Interface/preamp/mic upgrade options
I'm a composer that is looking into recording sound effects and foley in my studio. Right now I've got the Alesis IO2 Express, and the Rode NT1-A as a mic.
I would like to record quiet sounds with it,...
- 1
0
votes
2
answers
83
views
How do I make my AutoHybrid louder? (connected to my PA system)
I'm not an audio engineer, but I could sure use the help of one!
Recently I helped my church purchase a little box called an AutoHybrid by JK Audio. It basically takes a balanced line-level output ...
- 121
0
votes
0
answers
696
views
Suggestion on preamp, RME QuadMic 4 channel preamp?
I'm looking for a 2 channel, preferably 4 channel, mic preamp for the studio. My budget is around €350, which is what the RME QuadMic is going for in Europe. It seems to suite my needs but I'm not ...
- 43
1
vote
2
answers
2k
views
Connecting Turntable to Mic input to bypass preamp?
Would it be possible to connect a turntable to a mic input to completely bypass the preamp?
Keegan McCarthy
1
vote
2
answers
196
views
Is this audio signal path enough/correct?
After reading on the forum here, I have narrowed down some options to record classical solo flute (recital style in concert hall or similar) via the following setup. This is where I will start looking ...
- 199
3
votes
2
answers
1k
views
When should I use a separate preamp or field mixer when recording from a mic?
I'm quite new in sound recording - I'm only starting out with this as a hobby, and have yet to invest in (most of) the equipment...
Let's say I should record voice with a microphone into a mobile ...
poplitea
0
votes
6
answers
8k
views
lack of gain, Zoom H4n with Rode NGT2
I have just recently purchased a Zoom H4n and Rode NTG2 and I am also having the same problems with not enough gain (recording in stereo, with or w/o channel 1 and 2 linked and with or w/o mono mix ...
- 51
0
votes
1
answer
99
views
what is an A/D converter? and a recommendation about it
So its an analog to digital converter that uses sampling and quantization? I understand all of that but it sounds to me like it would change the outputted sound. How exactly is this performed?
The ...
- 1,141