Questions tagged [phantom]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
0 votes
0 answers
45 views

White noise only when using a microphone connected to audio interface

For starters, my setup is: D. J. M - 800U microphone and Audient ID4 audio interface. Originally the microphone came with a combined jack cable, so it essentially plugs into a USB interface and jack 3....
Vlad's user avatar
  • 1
1 vote
2 answers
107 views

phantom power rode VXLR+ and gaming headset

I bought an audio interface (m-audio m-track duo) and a rode VXLR+ since I need to use my gaming headset microphone on it. It works good, but I'm asking if keeping the phantom power up can damage my ...
Giacomino's user avatar
0 votes
0 answers
48 views

How to diagnose Clarett 2Pre USB phantom power issues?

I have a Clarett 2Pre USB that I am suspecting may be malfunctioning. My setup: Electric guitar w/ passive pickups -> Radial J48 -> Clarett 2Pre USB input (1 or 2, doesn't matter). 48V button ...
schumacher574's user avatar
1 vote
2 answers
95 views

Is it okay to connect Belden 8412 to condenser microphone?

I know there is Belden 8423 which states that it's specially made for phantom power, but I currently only have Belden 8412, since I only had dinamic microphone(before you ask, yes I am planning to buy ...
Skye-AT's user avatar
  • 113
0 votes
1 answer
70 views

USB audio interfaces and unusual guitar output [closed]

I have a nylon crossover guitar, with the output consisting of a male XLR connector instead of the usual jack socket. The instrument does not require an internal battery as it uses the +48v phantom ...
Ronnie 88's user avatar
0 votes
1 answer
303 views

TRS vs XLR -- phantom power

I watched a video about audio signal levels and at the 3:12 instructor tells basically this: When you are connecting "line level equipment" to the "audio interface", always use ...
71GA's user avatar
  • 121
0 votes
0 answers
1k views

How to supply a microphone with plug-in-power via TRS or TRRS plug?

I would like to use a Rode VideoMicro microphone requiring low-voltage phantom power, or plug-in power, on a device which does not supply plug-in-power. There seem to be commercial options, though I ...
Riley's user avatar
  • 101
1 vote
1 answer
196 views

Is it safe to have 48V supplied on a AudioBox USB96 combo XLR - 1/4" jack and plug in a guitar

I have a AudioBox USB96 interface. The box has two XLR 1/4" Combo jacks. I have a mic that requires 48V and is plugged into one of the connectors. I would like to plug my guitar into the ...
Rich Maes's user avatar
  • 113
0 votes
1 answer
185 views

Line6 UX2 audio card not working correctly with Phantom Power

I've got a problem with my Line6 UX2. I've got Logitech Z625 2.1 speakers plugged inside the output port of the audio card (using an adapter). If phantom power is on (no matter if a microphone is ...
kdpkke's user avatar
  • 3
0 votes
2 answers
1k views

XLR Condenser mic to 3.5mm input jack. How do I power the mic?

I am using a zoom h1n audio recorder, which takes a 3.5mm (1/8) input jack. I want to upgrade my microphone setup to a large-diaphragm condenser microphone. All the condenser microphones I am checking ...
Louis van Tonder's user avatar
1 vote
1 answer
547 views

How to connect a condenser microphone directly to a PC (without a mixer)

I have a condenser microphone Rode NT2 and I connected it to a PC in this way: The Rode NT2 is connected via XLR to a Behringer Phantom power generator. The phantom power generator is connected to a ...
user27463's user avatar
  • 121
1 vote
2 answers
2k views

Noise and Grounding: what's the point of external phantom power supplies?

I have a Focusrite Scarlet 2i2 2nd gen audio interface, which is powered through its USB bus. I have a AT2035 condenser mic attached to it, using the onboard phantom power capabilities. The interface ...
supertanker13's user avatar
0 votes
1 answer
2k views

Condenser Microphone Without Phantom Power - Constant Noise

Condenser Microphone > XLR Cable > USB Soundcard > Computer I haven't connected a phantom power, it records well but there is a constant noise/static in the background. Please help, how do I get ...
Piyush's user avatar
  • 1
1 vote
1 answer
795 views

Input levels (mic/inst/line) and DI-Box

Okay, I'm totally consused about the input levels. Let's say I have an audiointerface Presonus Studio 68. Inputs: Mic/line/inst Mic/line/inst Mic/inst Mic/inst There is also a button "line" which ...
ozahorulia's user avatar
0 votes
1 answer
744 views

Condensor mic with phantom power constantly buzzes

I have a AKG Pro Audio C214 Condenser Microphone powered by a 48V phantom power device (Neewer NW-100). There is a very loud, low buzzing, the frequency of which would indicate that its AC ...
w.brian's user avatar
  • 121
0 votes
1 answer
101 views

Cost-effective way to convert a clip-on condenser to wireless?

I have a clip-on condenser microphone, the Shure PGA98H-XLR, which I use for my trombone. It ends in an XLR adapter which clips onto my belt, and I can plug an XLR cable into that. For about 90% of ...
Mark Butler's user avatar
0 votes
1 answer
2k views

Splitting a condenser mic and using phantom power

I have a condenser mic that requires phantom power. I have a mixer that provides phantom power, and also a dedicated phantom power box if I need it. I would like to hook my microphone up to my mixer, ...
Josh Riser's user avatar
0 votes
1 answer
4k views

Phantom Power cause noise [duplicate]

so i have this weird problem, i just bought cheapo generic BM-800 microphone i plug it directly to my PC, while i generate some noise, but overall its ok, as to be expected then i try to boost the ...
Solid_Metal's user avatar
3 votes
2 answers
1k views

Is it safe to leave phantom power turned on?

I have a Yamama analogue mixer which has a phantom power switch (it turns phantom power on for all channels). We have a few condenser mics that need phantom power as well as a handful of wireless ...
lrey's user avatar
  • 33
0 votes
1 answer
1k views

Can I use phantom power on an iPad?

Is there a way to connect both phantom power and an iPad mini to my computer, so that I can use a condenser microphone in GarageBand? The microphone is an Earamble BM-800 and the phantom power is ...
Cannabijoy's user avatar
0 votes
1 answer
670 views

Can I damage condenser mic with Phantom Power connected using unbalanced cable?

I have Chord CM05 condenser microphone. For the first trials I bought cheap Phantom Power Supply, like this one: Unfortunately the XLR cable I used was unbalanced one (with pins 1&3 ...
Pavel Krpata's user avatar
3 votes
3 answers
8k views

Phantom Power: Would it run through TSR plugs and if so would it cause electrocution?

I have a professional external sound card and a condenser mic. However I'm not a musician and I have not bought the equipment for the purpose music production as it is only for the purpose developing ...
Transcendent's user avatar
1 vote
2 answers
73 views

Phantom Power Issue

Quick question about phantom power. I know while using full consoles, you want to make sure phantom is off, before plugging in a condenser mic, and the track is muted before turning phantom on, but ...
LuisNTFT's user avatar
1 vote
3 answers
1k views

Buzzing noise with Taffware BM 700 condenser microphone [duplicate]

I recently bought a Taffware BM 700 mic. See the spec below: I plugged in to my 3.5mm jack on my laptop but it had this buzzing noise everywhere, my voice was unaudible, so I decided to update the ...
Itsproinc's user avatar
  • 111
4 votes
1 answer
173 views

Why do some XLR connectors take batteries?

New to audio recording, and have a question regarding my mics. A few months back I acquired two Audio Technica AT899 lav mics, that I connect to a Zoom h4n. I use these to record interviews. I ...
R14's user avatar
  • 43
1 vote
4 answers
24k views

Buzzing noise with Condenser Microphone + Phantom advice

I'm using the Floureon® Condenser Microphone 3.5mm BM-800 Studio Recording Mic with the InnoGear® 48V Phantom Power Supply but I'm getting a buzzing noise in the background when I use the phantom ...
SirMangler's user avatar
1 vote
1 answer
106 views

Recording guitar and vocals (condenser mic) simultaneously

I'd like to ask if running a condenser mic on an interface with 48v phantom power enabled (such as the focusrite pro14) at the same time with a guitar in the other input, causes any issues. There is ...
Ivana Gnostav's user avatar
2 votes
2 answers
3k views

is it ok to use Phantom mics w/o phantom power

I have some desktop mics, (Shure Microflex412), which are phantom powered. What if i plug it in into powered mixer, without any phantom power ? I used these mics on Peavy powered mixer, which does ...
Zee Shan's user avatar
2 votes
2 answers
1k views

Simple phantom power for condenser mic

I am on a tight budget, and would like to some voice recording (e.g. podcasts). I have a decent condenser mic, but I do not have a phantom power supply. The phantom power supply/interface only needs ...
KoreanwGlasses's user avatar
3 votes
4 answers
18k views

How to record with a phantom powered microphone on a computer?

I want to record with a CAD Audio GXL2200 Cardioid Condenser Microphone into a laptop, but I don't know how to connect it. The mic did not come with a cord, so I bought one, but the plug in is way ...
tmcamp626's user avatar
1 vote
1 answer
812 views

Connect Aux Send to a phantom powered input (designed for electret mics)

I'm trying to connect a mixing console to a videoconferencing equipment, to send the audio out of the console to the mic input of the videoconferencing unit. We are talking about a Yamaha MG166cx ...
Cadu Ellery's user avatar
1 vote
1 answer
209 views

Dual Phantom Power sources?

I have a question if anyone would be kind enough to answer. I have a phantom power on my mixer and my sound card. I have only ever used the phantom supply on the mixer because that is where the mic is ...
Adam R's user avatar
  • 11
1 vote
3 answers
2k views

Can I use an AKG WMS40 wireless system to transmit a signal coming from a headphone jack?

I have an AKG WMS40 wireless emitter/receiver combo which I use with a condenser mic that needs phantom power and gets it from the emitter bodypack. If I use a minijack to mini-XLR adapter cable, can ...
OMA's user avatar
  • 125
1 vote
1 answer
40 views

Powering a DI box

We have just installed a new sound system at my church. As part of this we are using a DI box to connect in a keyboard. The DI box needs power either from Phantom Power or a 9V battery. Our sound desk ...
user avatar
2 votes
3 answers
340 views

How do I know if phantom power is on or off?

I have the +48V push rectangle on my small Behringer 602A. How do I know if the phantom power is on or off? Is it on when the light is red and button is pushed in? I am starting with a condenser ...
Carolyn Horn's user avatar
1 vote
2 answers
480 views

Portable phantom power

Does anybody know of a reasonably inexpensive portable (i.e. battery powered) phantom power supply? Most of the ones I've seen are in the $150-$200 range. Or is that in itself inexpensive?
g.a.harry's user avatar
  • 4,290
3 votes
2 answers
2k views

MKH 415 T POWER

I have been offered a matching pair of Sennheiser MKH415 mics that are powered by T Power rather than 48 phantom. I record on Sound devices 702t and Fostex Fr2le and therefore cannot supply the right ...
Lenny's user avatar
  • 743