Questions tagged [mixer]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
1
vote
5answers
12k views

Sending PC audio through mixer sounds messed up

I have been using/playing around with the Behringer Xenyx 802 mixer for patching my PC audio, PS4 audio, and XLR microphone to various places. Mainly into the PC to stream to Twitch, and from the PC ...
2
votes
1answer
113 views

Not enough power to run speakers at 60ft distance?

I am trying to move my powered mixer to the back of a building. The wires have to travel 60ft to the mic's and speakers at the front of the building. When I tried this I could not get sound to come ...
0
votes
1answer
758 views

Recording from Sound Board to Zoom Handy Recorder H4n

How do I get my Handy Recorder H4n to record directly from an Alto Live 802 mixer via the Aux Out port?
0
votes
1answer
9k views

Using a mixer with a PC and PS4

I have been looking into using an audio mixer for my PS4 streaming. I am probably going to get a decent XLR microphone to use, and use this mixer, but need a little direction. http://www.amazon.com/...
3
votes
2answers
181 views

What interface should I choose to extend Yamaha LS9-32 outputs?

I need more outputs on Yamaha LS9-32 so I am looking for an interface to extend outputs via ADAT output. I have MY16-AT card in it.
7
votes
5answers
18k views

TRS 3.5mm microphone not working in mixer

I can't get my microphone to work in my mixer. It is a standard 3.5mm TRS headset microphone. I have it plugged into a 3.5mm TRS to 1/4" TRS adapter, which is plugged into a 1/4" TRS to XLR adapter. I ...
2
votes
1answer
1k views

What do I need to mix four microphones to PC, monitor all mics and PC output

Ok, so we do recordings of games all at one computer (four of us). We have 4 lav mics that have TRRS 3.5mm jacks (so we can use them on our smartphones for other things). We have 4 pairs of earbuds ...
0
votes
1answer
673 views

Can I use the stereo channel on my mixer for my over head mics?

I have a Phonic Powerpod 820 mixer that has 4 mono channels and 2 stereo channels. Can I route both of my overhead mics through one of the stereo channels? The stereo channels only have 2 1/4" inputs, ...
1
vote
1answer
558 views

Mixers conducting stereo signal from TRS to line out R/L - are there some? Where to find?

I'm completely green in those topics. However, there raised a need, or maybe for now an interest of mixer and what I request you is simple and accurate answer. I want to, inter alia, link 3 devices: ...
2
votes
1answer
405 views

Can I run a mixer off a battery?

I am in India, and there's no RadioShack equivalent here ... running to the corner store isn't an option to get components. If I need to get components I'll have to order them online. So. My question:...
0
votes
1answer
809 views

Stereo 3.5mm jack to RCA or 6.35mm jack on Yamaha MG24?

I want to connect an iPod / Computer etc with a stereo 3.5mm jack to a Yamaha MG24. The MG24 has a stereo channel with both a pair of RCA inputs and a pair of 6.35mm jacks (see below, illustration ...
2
votes
1answer
3k views

Routing sounds to and from my computer

I know this might sound very basic to most of you, but I haven't been able to find an answer to this question yet. How can I route my sounds to and from (mainly from) my computer? I recently ...
0
votes
1answer
66 views

Amping indoor and outdoor speakers

I'm helping a friend with their resturant. They have indoor and outdoor passive speakers connected to a single amp. How can I go about making the outside louder with out making the inside loud. ...
0
votes
1answer
4k views

Can FX send be used as an extra AUX send on mixer?

We have the Allen & Heath PA28 in our church. We use the two FB1 & FB2 outputs for our primary stage monitors. We have one other AUX output that are using for recording purposes. Now we are ...
0
votes
1answer
777 views

Can I use a powered mixer as an unpowered mixer via the effects loop output?

Using the 1/4" Line Out of an Effects Loop, can I use a powered mixer as an unpowered mixer without damaging the mixer? I understand I would never send the speaker outputs from a powered mixer to ...
0
votes
2answers
3k views

How to tell number of audio channels exposed to computer over USB?

I would like to record multiple separate channels on my computer. I.e. such that each input in the breakout box is exposed as an separate input to the audio software. It seems like a lot of breakout ...
0
votes
1answer
403 views

Cubase AI6 and Xonar U7 - weird noise and overdubbing problem

Let me first describe my setup. The PC is a pretty standard one with Win7 x64 Pro and Cubase AI 6. The soundcard is ASUS Xonar U7 with 2xRCA main output, PHONES and MIC jacks. The sound setup is a bit ...
2
votes
1answer
392 views

Help with setting up audio recording for retirement home meeting

First time posting on here. My mother's apartment complex like to record their board meeting and are on a small (< $300) budget. There should be four board members speaking, each should have a ...
1
vote
1answer
64 views

What type of filter is the low and high on my mixer

I have a mixer ( Yamaha n12 ). It has a high and low eq and also a mid with a separate q nob. In the manual it states the the high and low are shelving filters but explains no more than that. Would it ...
1
vote
1answer
117 views

Dual Phantom Power sources?

I have a question if anyone would be kind enough to answer. I have a phantom power on my mixer and my sound card. I have only ever used the phantom supply on the mixer because that is where the mic is ...
3
votes
2answers
14k views

Remove Buzzing on PC Line In Jack with Audio Compressor After Mixer

I have done some pretty detailed trouble shooting on this and just want to know what additional equipment or things to try to eliminate the electronic buzzing noise I get. PC Line In Jack Behringer ...
0
votes
2answers
3k views

Balanced output to stereo unbalanced input

My preamp gives a balanced TRS output instead of unbalanced stereo which is what my input device requires. Is it possible there is a reverse DI box of sorts that converts balanced mono to unbalanced ...
3
votes
1answer
68 views

Using the digital snake with the X32

If I use one S16 digital snake with the X32, can I route it with channels 17 thru 32 and outputs 9 thru 16?
1
vote
2answers
9k views

Using an unpowered microphone on a mixer board?

I just recently bought a Mackie 402VLZ4 and trying to use a set of microphones on the board. The microphones I'm trying to use are as follows: A lavalier microphone (mini to XLR adapter being used):...
1
vote
1answer
105 views

Line in 5/6 sounds awful

Bought a Behringer XENYX1202. When I plug in a 1/4 cable into the mic lines (1-4), everything sounds fantastic. However, when I plug the same cable into 5/6 it sounds pretty awful until I pull it out ...
3
votes
2answers
244 views

Building a modern radio studio

Hope this isn't a question that's been asked a thousand times before! I've been press-ganged into building a new 'portable' studio for a non-profit community radio station. Unfortunately I've never ...
1
vote
3answers
3k views

How to send different mix to 3 seperate headphones?

I would like to be able to send different mixes to different headphones. I initially did this by putting it through the Aux sends, but this comes out in mono and suffers from a large amount of ...
3
votes
2answers
3k views

How do I connect Zoom recorder to Yamaha mixer?

How do I connect my Zoom H4n to a Yamaha MG82CX that someone else is setting up? Just because the connectors match doesn't mean it works, and playing connector-converter doesn't help. I've always ...
2
votes
2answers
243 views

Laptop audio out to mixing board 30' away

Where I work we routinely need to connect random laptops, both PC and Mac, to our mixing board usually at a distance of about 30' away. Generally we will be connecting to both a projector in the ...
2
votes
1answer
449 views

Passive Speakers connected to a mixer

I have a pair of Yamaha NS-333 speakers that are passive/unpowered speakers. Will I damage them by connecting them to a mixer or will I simply get a lower sound quality without an audio amplifier?
1
vote
2answers
2k views

Audio interface or Mixer with built-in audio interface?

Currently I have no equipment, but i plan on building up a very basic home studio and home DJing setup. The first thing i want to buy is a set of self powered studio monitors (KRK Rokit RP5's). I was ...
2
votes
3answers
2k views

FL studio route one mixer track to another

Can I redirect the audio output of a mixer track to another mixer track ? There is send to Insert XX. But it also sends the sound to Master. I want to route the sound completely to an insert track I ...
2
votes
0answers
1k views

Program for mixing multiple inputs and outputting to single stream

Is there some software that I can use that cane take multiple audio inputs, say from a mic, and two virtual audio cables, mix them so I can change volumes and gain and all that, and then output to ...
3
votes
2answers
12k views

How to get AUX send mono signal converted to stereo?

I have a small mixer (Soundcraft Spirit Folio Lite) with 2 AUX sends that I want to use for monitoring. I'm plugging one of those AUX sends to the CD/MP3 in of my POD HD500X guitar multieffect so I ...
3
votes
2answers
2k views

Removing pop sounds and heavy breathing from male voice

We have a male actor who tends to breathe heavily and enunciates his p's quite distinctively. What could we do to reduce or completely remove the pop-like sounds during a live performance? Any eq ...
0
votes
1answer
1k views

podcast with multiple mics, linux os: should i run the mics through an audio interface/mixer or connect both to pc using virtual audio cable?

any suggestions on how to best set up my mics for a multi mic podcasting setup? i haven't purchased any equipment yet. planning on buying a few mics, and then connecting them in the following ways. ...
2
votes
1answer
917 views

Multiple audio sources to monitoring speakers

I bought a mixer (Alesis MultiMix 4) thinking I would be able to connect multiple stereo audio sources (jack or mini jack) , adjust their level which each knob and output everything on a pair of ...
1
vote
0answers
463 views

Using a crossfader in a passive circuit

I'm trying to build a really simple passive summing circuit for combining two line-level stereo audio sources (iPod + laptop or iPod + iPod), and I really want to be able to fade between the sources. ...
2
votes
1answer
65 views

Effects: On “insert” or “on-line”

I'm not sure how's it called. I use an EQ for my microphone. I have two options how to plug it: Microphone -> MIC IN -> Insert OUT -> EQ unit -> Insert IN -> Microphone -> EQ unit -&...
2
votes
2answers
1k views

Which cable should be used in paired AUX sends and return on mixer?

My mixer has paired aux send and return jacks. For example aux 1/2 send and return are SPDIF, and the 3/4, 5/6 aux send and return jacks are paired. There are not separate aux send and return jacks. ...
3
votes
1answer
6k views

Connect powered speakers to powered mixer?

I would like to know if it isn't dangerous to connect a pair of speakers (Edifier r1000tc power supplied) to Beringher PMH2000 (power mixer).
0
votes
3answers
867 views

How do you eliminate or lessen feedback?

I have a 24 channel mackie mixing board, and I am trying to run two shure super 55s through the board and into two EV 1 inch monitors. I am getting a large amount of feedback whenever I try to get any ...
0
votes
1answer
191 views

Can I assign the left side of a stereo channel to both subgroups in a stereo set and assign it stereo in a different set? [closed]

I have a Behringer x2442usb mixer which has a stereo effects unit. I would like to be able to assign the effect to both sub-groups 1-2 and 3-4, with subgroup 1-2 for left channel only while subgroup ...
0
votes
2answers
246 views

Using radio mics with SQN mixer

I have a few questions regarding the usage of radio mics and their input level into an SQN mixer; Does the radio transmitter/receiver for the mic transmit/receive "mic level" or "line level" audio, ...
0
votes
2answers
336 views

Interference caused by a mixer?

I'm having a 'problem' with wireless sets we use. (Sennheiser EW100 G3) Whenever it's directly connected to one of our ENG broadcast camera's they work just fine. However, when the wireless receiver ...
2
votes
2answers
828 views

How to separate in-ear monitor mix from audience mix?

I'm totally new to mixing and live environments, but my main concern is having In Ear Monitors for my band so we can hear a metronome. But I don't want the audience to hear it. This is the mixer I'm ...
2
votes
1answer
708 views

Multiple IEM mixes / multiple transmitters?

I'm wondering how to have multiple IEM mixes. So the drummer hears a mix different than the lead vocals mix. I know one way to do this is, pan some instruments left and right and send mono signals to ...
0
votes
1answer
100 views

Having issues with a Pop and a Hiss

I put this video together to help demonstrate my problem: I forgot to mention in the video, but my entire rig runs through a Monster Pro Power 2500.
3
votes
2answers
1k views

How do I hear the metronome in my ears without the audience hearing it?

I'm looking to get this mixer - this one And I'll have the whole band hooked up to in ear monitors so we can hear all of the instruments/vocals and metronome. But is it possible to have the metronome ...
-1
votes
5answers
2k views

New to mixing. Does everything go into one speaker? [closed]

I just started looking into performing live. When I purchase a mixer, I'll have the guitar, bass, vocals, maybe even piano, pass through the mixer correct? Different channels. But do mixers only have ...