Questions tagged [mixer]
A mixer is used to mix (add) audio signals by varying amounts. Mixers can be hardware or software and can vary from small software tools to large physical desks. See "mixing" tag for more. Use for questions related to the use of mixers.
218
questions
0
votes
1
answer
9k
views
Using a mixer with a PC and PS4
I have been looking into using an audio mixer for my PS4 streaming. I am probably going to get a decent XLR microphone to use, and use this mixer, but need a little direction.
http://www.amazon.com/...
- 3,782
2
votes
1
answer
1k
views
What do I need to mix four microphones to PC, monitor all mics and PC output
Ok, so we do recordings of games all at one computer (four of us).
We have 4 lav mics that have TRRS 3.5mm jacks (so we can use them on our smartphones for other things).
We have 4 pairs of earbuds ...
- 3,782
1
vote
1
answer
67
views
What type of filter is the low and high on my mixer
I have a mixer ( Yamaha n12 ). It has a high and low eq and also a mid with a separate q nob. In the manual it states the the high and low are shelving filters but explains no more than that. Would it ...
- 295
1
vote
1
answer
703
views
Mixers conducting stereo signal from TRS to line out R/L - are there some? Where to find?
I'm completely green in those topics. However, there raised a need, or maybe for now an interest of mixer and what I request you is simple and accurate answer.
I want to, inter alia, link 3 devices: ...
- 6,066
2
votes
1
answer
464
views
Can I run a mixer off a battery?
I am in India, and there's no RadioShack equivalent here ... running to the corner store isn't an option to get components. If I need to get components I'll have to order them online.
So. My question:...
- 53
0
votes
1
answer
68
views
Amping indoor and outdoor speakers
I'm helping a friend with their resturant.
They have indoor and outdoor passive speakers connected to a single amp. How can I go about making the outside louder with out making the inside loud.
...
- 334
0
votes
1
answer
1k
views
Can I use a powered mixer as an unpowered mixer via the effects loop output?
Using the 1/4" Line Out of an Effects Loop, can I use a powered mixer as an unpowered mixer without damaging the mixer?
I understand I would never send the speaker outputs from a powered mixer to ...
- 6,066
3
votes
1
answer
8k
views
Connect powered speakers to powered mixer?
I would like to know if it isn't dangerous to connect a pair of speakers (Edifier r1000tc power supplied) to Beringher PMH2000 (power mixer).
3
votes
2
answers
4k
views
How do I connect Zoom recorder to Yamaha mixer?
How do I connect my Zoom H4n to a Yamaha MG82CX that someone else is setting up?
Just because the connectors match doesn't mean it works, and playing connector-converter doesn't help. I've always ...
CommunityBot
- 1
0
votes
2
answers
4k
views
How to tell number of audio channels exposed to computer over USB?
I would like to record multiple separate channels on my computer. I.e. such that each input in the breakout box is exposed as an separate input to the audio software.
It seems like a lot of breakout ...
- 4,455
2
votes
1
answer
447
views
Help with setting up audio recording for retirement home meeting
First time posting on here. My mother's apartment complex like to record their board meeting and are on a small (< $300) budget. There should be four board members speaking, each should have a ...
- 131
3
votes
1
answer
91
views
Using the digital snake with the X32
If I use one S16 digital snake with the X32, can I route it with channels 17 thru 32 and outputs 9 thru 16?
- 341
1
vote
1
answer
205
views
Dual Phantom Power sources?
I have a question if anyone would be kind enough to answer. I have a phantom power on my mixer and my sound card. I have only ever used the phantom supply on the mixer because that is where the mic is ...
- 21
3
votes
4
answers
6k
views
How does the group work on the Behringer X2442USB?
My Behringer X2442USB has a little panel on the left that has the follow
[Button] [Button] [Button] [Button]
LEFT LEFT LEFT LEFT
[Button] [Button] [Button] [Button]
...
1
vote
1
answer
215
views
Line in 5/6 sounds awful
Bought a Behringer XENYX1202. When I plug in a 1/4 cable into the mic lines (1-4), everything sounds fantastic. However, when I plug the same cable into 5/6 it sounds pretty awful until I pull it out ...
- 8,162
4
votes
2
answers
274
views
Building a modern radio studio
Hope this isn't a question that's been asked a thousand times before!
I've been press-ganged into building a new 'portable' studio for a non-profit community radio station. Unfortunately I've never ...
2
votes
2
answers
279
views
Laptop audio out to mixing board 30' away
Where I work we routinely need to connect random laptops, both PC and Mac, to our mixing board usually at a distance of about 30' away.
Generally we will be connecting to both a projector in the ...
- 8,560
1
vote
2
answers
2k
views
Audio interface or Mixer with built-in audio interface?
Currently I have no equipment, but i plan on building up a very basic home studio and home DJing setup. The first thing i want to buy is a set of self powered studio monitors (KRK Rokit RP5's).
I was ...
- 166
2
votes
1
answer
460
views
Passive Speakers connected to a mixer
I have a pair of Yamaha NS-333 speakers that are passive/unpowered speakers. Will I damage them by connecting them to a mixer or will I simply get a lower sound quality without an audio amplifier?
- 625
2
votes
1
answer
1k
views
Multiple IEM mixes / multiple transmitters?
I'm wondering how to have multiple IEM mixes. So the drummer hears a mix different than the lead vocals mix.
I know one way to do this is, pan some instruments left and right and send mono signals to ...
CommunityBot
- 1
0
votes
1
answer
1k
views
podcast with multiple mics, linux os: should i run the mics through an audio interface/mixer or connect both to pc using virtual audio cable?
any suggestions on how to best set up my mics for a multi mic podcasting setup? i haven't purchased any equipment yet. planning on buying a few mics, and then connecting them in the following ways. ...
- 166
2
votes
1
answer
1k
views
Multiple audio sources to monitoring speakers
I bought a mixer (Alesis MultiMix 4) thinking I would be able to connect multiple stereo audio sources (jack or mini jack) , adjust their level which each knob and output everything on a pair of ...
- 8,162
1
vote
0
answers
528
views
Using a crossfader in a passive circuit
I'm trying to build a really simple passive summing circuit for combining two line-level stereo audio sources (iPod + laptop or iPod + iPod), and I really want to be able to fade between the sources.
...
- 111
0
votes
3
answers
973
views
How do you eliminate or lessen feedback?
I have a 24 channel mackie mixing board, and I am trying to run two shure super 55s through the board and into two EV 1 inch monitors. I am getting a large amount of feedback whenever I try to get any ...
2
votes
1
answer
67
views
Effects: On "insert" or "on-line"
I'm not sure how's it called. I use an EQ for my microphone. I have two options how to plug it:
Microphone -> MIC IN -> Insert OUT -> EQ unit -> Insert IN ->
Microphone -> EQ unit -&...
- 151
0
votes
1
answer
101
views
Having issues with a Pop and a Hiss
I put this video together to help demonstrate my problem:
I forgot to mention in the video, but my entire rig runs through a Monster Pro Power 2500.
CommunityBot
- 1
0
votes
1
answer
236
views
Can I assign the left side of a stereo channel to both subgroups in a stereo set and assign it stereo in a different set? [closed]
I have a Behringer x2442usb mixer which has a stereo effects unit. I would like to be able to assign the effect to both sub-groups 1-2 and 3-4, with subgroup 1-2 for left channel only while subgroup ...
- 8,162
0
votes
2
answers
275
views
Using radio mics with SQN mixer
I have a few questions regarding the usage of radio mics and their input level into an SQN mixer;
Does the radio transmitter/receiver for the mic transmit/receive "mic level" or "line level" audio, ...
- 8,162
0
votes
2
answers
508
views
Interference caused by a mixer?
I'm having a 'problem' with wireless sets we use. (Sennheiser EW100 G3)
Whenever it's directly connected to one of our ENG broadcast camera's they work just fine.
However, when the wireless receiver ...
- 1,781
2
votes
1
answer
605
views
How can I combine various audio inputs into 1 optical ouput to feed into my surround sound?
I have a setup in my house where I have 1 surround sound in a room with 4 things connected to it w/ optical audio and 1 with the standard red/white cables. What I want to do is be able to do is listen ...
- 5,959
6
votes
1
answer
26
views
fast routing (switching) of a single output to n distinct monitors
I need to route sound from a personal computer to one of a horde of monitors. Only one monitor will be active at any one time, but I need to be able to switch between monitors rapidly (<50ms) ...
- 5,959
-1
votes
5
answers
2k
views
New to mixing. Does everything go into one speaker? [closed]
I just started looking into performing live.
When I purchase a mixer, I'll have the guitar, bass, vocals, maybe even piano, pass through the mixer correct? Different channels. But do mixers only have ...
- 296
3
votes
2
answers
2k
views
How do I hear the metronome in my ears without the audience hearing it?
I'm looking to get this mixer - this one
And I'll have the whole band hooked up to in ear monitors so we can hear all of the instruments/vocals and metronome. But is it possible to have the metronome ...
- 1,782
1
vote
3
answers
15k
views
How to use the matrix on a SoundCraft Si Compact 32?
We just got a SoundCraft Si Compact 32, but we can't figure out how to use the matrix. In the world of analog mixers, it's easy. You just choose what you want to mix in, and you're good to go.
Our ...
- 930
0
votes
1
answer
443
views
I'm going to get an IEM system but I need a mixer
I am going to buy an IEM system so I can hear my vocals. (I am the lead singer in a band)
I don't really care about hearing the music, I'll be able to. If my vocals are the only thing that I can hear ...
- 8,162
1
vote
2
answers
3k
views
What is the difference between QX1622USB and QX1222USB
I am looking to purchase a mixer and am keen to know the practical difference between these two mixers. The price is about the same.
What circumstances would you prefer the one over the other?
The ...
Michael Wiles
0
votes
1
answer
468
views
Using SQN into a H4n, issues!
Hello folks
Had a sound job this week where I tried to use an SQN mixer into a H4n only to find out sending any kind of signal just limited the H4n dB meter. Padding the SQN with -20dB resulted in ...
CommunityBot
- 1
2
votes
3
answers
1k
views
Do analog mixers boost mic level to line level?
Does your typical analog non-powered mixer boost the mic inputs to line level for all the signal processing ie. effects, eq, panning, or does it remain mic level?
- 1,781
2
votes
1
answer
46
views
How to best sum 32 microphones to 4 lines
I need to find a way (not using a large mixer on stage) to sum 32 microphones to 4 lines. In a small package (preferably rack mounted).
Per now I use a large soundcraft mixer and aux sends. It pains ...
AlexanderBrevig
0
votes
2
answers
180
views
A budget audio interface with surface controls and multi-track recording ability
I'm currently trying to find an interface which meets my needs for podcast recording. The needs are as follows:
at least 2 XLR microphone inputs.
at least 3 line inputs for recording turntables or ...
CommunityBot
- 1
1
vote
6
answers
929
views
i want learn ''production sound mixing'' for film, particularly everything about the field mixer and what it can do for me. any DVD/book tutorial?
i know how to use boom, microphone, cable and all its function to its best. but when i use 2microphone or more i don't know how to operate my field mixer. actually i don't know anything about mixer. i ...
- 8,835
1
vote
2
answers
1k
views
Setting up Mixer Help
I need some help setting up my mixer. It is a Radioshack 4 Channel Mixer with effects. I have a speaker set, and the main speaker (Right) has input and output jacks (3.5mm)
My monitor also has input ...
user3368
1
vote
1
answer
4k
views
Record more than two external mics with Tascam DR-40 into separate tracks
Tascam DR-40 has two external mic inputs. I believe I can record two stereo tracks on each input. I've been plugging in an XLR microphone into each of the two inputs and recording a podcast with two ...
Lex
2
votes
3
answers
7k
views
Noise connecting mixer to PC
I've got a Xenyx1202FX that I am trying to use to record some stuff. I connect it to the PC throughout the stereo main out into the PC (win7) line in. I am also using a UK-> EURO power adapter. ...
MobileCushion
3
votes
2
answers
2k
views
Recording with a mixer
I've recently bought a small mixer (YAMAHA MG102C) for my semi-complex routing needs and have trouble incorporating it in my current setup. The mixer works flawlessly but when the time comes for ...
Alexander Ivanov
1
vote
1
answer
3k
views
Active/Passive Speakers - Powered or Unpowered mixers?
I've been searching for mixers, and speakers. I'm setting up a small practice room in my basement.
I've been using my school's. This was working, never really looked much into speaker types and ...
Frederik Spang
2
votes
1
answer
3k
views
Phantom Power Staying On
I just purchased a Behringer Xenyx 802 mixer and have a question about phantom power, which might be a general question--not just about the 802.
There is a "Phantom Power" switch that turns it on for ...
Mark A Johnson
1
vote
1
answer
600
views
Are "mute groups" only for monitors, and can "scenes" be layered?
Before you answer "just try it": I can't since I haven't decided on the hardware yet.
Background:
I'm in the process of looking at digital mixers and comparing their capabilities in order to replace ...
- 388
1
vote
1
answer
92
views
Microphone v Phone Line Levels during Interviews
I have a Behringer Xenyx 502 mixer.
My problem is the microphone levels are always much hotter than the phone line. Boosting the phone line isn't the problem as much as not overdriving the ...
CommunityBot
- 1
0
votes
3
answers
650
views
How to set levels of camera to the mixer?
Hey guys,
I have a Azden fmx-22 mixer that I will connect a NTG-2 to and from there it will go into a Panasonic HDC Z10000 camera.
How do I set the levels of the camera to the mixer if the mixer ...
