Questions tagged [audio-interfaces]
Audio interfaces are dedicated devices with the core function of transferring analogue audio streams to and from digital computer systems. Use for questions where the audio interface is an important aspect. See the full tag wiki for more info.
215
questions
0
votes
0
answers
16
views
Connecting USB audio interphase with guitar amplifier equiped by XLR direct output
I need to connect my Acus Stage 3 guitar amplifier that has dedicated XLR direct output for each channel to the Audient USB audio interphase that has send/ret (6.33mm jack ) on two channels (along ...
- 101
0
votes
0
answers
24
views
On the selection of Audio USB interface/mixer for LIVE recordings
I am looking for a compact mixer or an USB audio interface that could be connected to my electric guitar via D.I. or directly to the condenser microphone and then to the iPhone via usb supported by ...
- 101
-1
votes
0
answers
53
views
Switchable Audio Setup for dual computer use
I am looking for an audio setup that enables me to easily switch microphone and headphones between 2 computers (like one work computer and a private one).
The ideal setup would enable me to mix both ...
- 1
2
votes
0
answers
45
views
Audio Interface + Microphone: Load Impedance / ratio
I want to buy an Audio Interface and Condenser Microphone to record to my PC. I found the two following matching my needs:
SSL 12 (Overview)
Austrian Audio OC818 (Overview)
But according to several ...
- 21
-1
votes
1
answer
69
views
Troubleshooting clipping
I am collecting data for a project, where I am measuring the room impulse response by playing a sine sweep from a speaker (QSC K8 1KW Active Loudspeaker) and measuring it from the other side of the ...
2
votes
1
answer
83
views
How do I get the signal from shotgun mic for cameras into audio interface?
Want to get the sound from my Sennheiser MKE 400 --- a battery-powered shotgun mic with a 3.5 mm TRS output --- into my Audient Evo 4's XLR/TRS combo inputs.
I first tried using a 3.5 mm (1/8") ...
- 131
1
vote
3
answers
41
views
How can I avoid the sound from my computer speakers being picked up by my mic during Zoom calls?
Just started using a Samson C01 condenser XLR microphone + Audient Evo 4 audio interface for sound on my Zoom calls. Headphones aren't very comfortable for me, so I use speakers to listen to the audio....
- 131
0
votes
0
answers
27
views
How can I monitor and send a wet signal from my DAW to my conferencing software?
I purchased a Shure SM57 to use for conference calls. It is connected to an audio interface (RME Babyface original). I want to apply dynamic effects to it but the software that comes with the RME ...
- 101
1
vote
0
answers
37
views
Can Blue Yeti X (USB) play well with Audio Interface (Scarlett 2i2) for music?
I was recently given a Blue Yeti X, and I wanted to see if I could integrate it into my existing studio setup. My current setup is a Scarlett 2i2, using Reaper as my DAW. I usually plug my guitars ...
- 111
1
vote
0
answers
191
views
What is acceptable amount of noise for USB audio-interface?
I've just got Behringer U-Phoria UMC202HD and the thing I'm trying to figure out first with it is if it is ok to have some amount of (white) noise in the background. The state is the following:
Audio ...
0
votes
1
answer
71
views
Options for connecting XLR mic to computer KVM via aux?
I recently purchased a Shure SM7B microphone to use in an entry-level home studio, but I want to be able to switch it between multiple desktops. I already have a KVM for switching all of my other ...
- 103
0
votes
2
answers
41
views
Getting Levels Right for Voice and Instrument on Videos
I don't know if this is the right forum. Apologies if not.
I'm making videos on playing the recorder and I'm using a good quality headset and a loop station (Boss rc505) as an audio interface. ...
- 111
0
votes
1
answer
58
views
Why does my microphone sound tinny when I turn up my output on my Audio Interface?
thank you in advance for any help you can give me!
So I have a Samson 03 Condenser Mic plugged in to my Sonos Audiobox USB 96, but the problem is that the mic starts to sound really tinny and weird, ...
1
vote
1
answer
54
views
gain value at intermediate knob positions?
I study and record bat calls using consumer audio devices. I've been using the Fireface USB audio interface series (802, UC, UCX) along with their other 4 channel preamp devices.
The gain knob has 3 ...
- 121
0
votes
1
answer
103
views
How to connect Focusrite scarlett 2i2 3rd gen to Behringer MS40 Studio monitors? [closed]
Given below are images of the available hardware in my desk setup.
PREVIOUS SETUP :
Guitar plugged into focusrite through 9mm jack.
2 9mm wire connected between Focusrite and JBL's ( TRS Balanced ) ...
- 103
0
votes
1
answer
87
views
How to change USB mode on the DacMagic 100
The Cambridge Audio DacMagic 100 is using USB 1. How to change to USB 2?
Note, this might also fix a problem with it not working.
- 101
1
vote
0
answers
72
views
play multiple sound files max msp
I have a sound card (fca610 – Behringer) with multiple outputs and have three audio files (mono).
I am trying to play each audio file on different channel.
Inn max I have added a DAC for audio output ...
- 11
0
votes
1
answer
299
views
How to merge two audio outputs to one output
I'm trying to merge two audio outputs which are my microphone and VB-Audio Virtual Cable, to one output, and maybe make one of the outputs quieter when my microphone is making sound. I'm looking for a ...
- 1
1
vote
2
answers
109
views
Audio interface and mic monitor for video conferencing
I am thinking of getting an XLR microphone for video conferencing. Will the mic monitoring output of the audio interface only output my voice or the audio from the video conferencing software mixed ...
- 111
0
votes
1
answer
377
views
Using a 2 Stereo to Mono RCA cables to mix two inputs into one output [closed]
TL;dr - will a Stereo to Mono RCA adapter tolerate the same channel from two different sources (Left from Device 1, Left from Device 2)?
I have a bit of a weird use case that I am looking to create an ...
- 1
2
votes
1
answer
30
views
Can I use a ESI MAYA44 eX to record an electric guitar?
I'm trying to record an electric guitar and apply effects (amp sim, etc.) through my DAW, then play back the result through headphones with minimal delay.
So far, I have been using the Scarlett Solo ...
- 123
-1
votes
1
answer
24
views
Need advice on hardware and software to manage sound from microphone into Mac for interviews
I am occasionally interviewed via teleconference platforms (sometimes Zoom, sometimes through web interface applications). I need to improve the quality of my audio. I have a high-end (fast) Mac, and ...
- 1
0
votes
0
answers
34
views
Steinberg UR22 and UR24C signal is panned
I have a problem with my Steinberg UR22, the sound has started to feel stronger by about 5-10% in the left channel (headphones). I thought it was a HW problem so I ordered a new sound interface, this ...
- 121
0
votes
0
answers
93
views
Low end is missing from audio through sound interface and condenser mic going to macOS
My setup is very cheap. I consider myself a beginner, so I wanted to learn and let this learning journey progressively unveil the need for better gear.
Mic: Neewer® NW-700 Professional Studio ...
- 101
3
votes
3
answers
217
views
How can I tell if a 1/4" female jack is balanced or unbalanced?
I purchased a used Yamaha Clavinova CVP-65 and there are two 1/4" female output jacks labeled L/L+R and R on the underside. The manual does not indicate if these are balanced to be used with two ...
- 31
0
votes
1
answer
253
views
Can a bad XLR cable break my usb audio interface?
From church, I took home two XLR Cables (16 AWG) that I considered may be broken, so that I could test them in a more controlled environment.
My Focusrite Scarlett 2i4 has been working great in the ...
- 113
0
votes
0
answers
76
views
How do I connect active speakers
I have a pair of Mackie MR524.
I would like to use them with my laptop and tablet.
To simply plug in my tablet or phone without an interface what cables do I require?
I have RCA, XLR to 3.5mm XLR to ...
0
votes
0
answers
26
views
Need advice for a two-person live music and video game streaming setup
My girlfriend live-streams games on Twitch. I want to live-loop music (guitar, keyboard, electronic drums) in the background that plays along with her stream.
I want to be able to hear her computer ...
0
votes
1
answer
521
views
Would the Focusrite Scarlett be a good pair with the Samson Q2U
I'm looking at getting an XLR interface for my Samson Q2U as right now its just USB and while it works fine I want to keep improving my setup. The Samson Q2U claims it has a sensitivity of -54 dB ...
0
votes
1
answer
259
views
Behringer Euphoria UMC404HD damaged after connecting iRig2
Context
I was trying to send audio from my interface to clubhouse through my phone and I think I fried some parts of interface through the process. I have a Behringer UMC 404HD interface, a bunch of ...
- 101
1
vote
2
answers
95
views
Mono adapter on stero output [closed]
My soundcard (Sennheiser HDVD800) has a 6.35mm jack output that I'd like to adapt to listen on my earphones (3.5mm connector).
However, I'd like to retrieve only the first channel (L or R) outputted ...
- 11
1
vote
1
answer
159
views
Guitar gain and noise setup for amp sim
I'm looking at recording DI guitar and I have a few questions regarding setup input levels and dealing with noise.
My current setup:
Ibanez RG321MHE (EMG h4 passive humbuckers)
Behringer UMC204HD ...
- 113
0
votes
1
answer
65
views
Combine a multicahannle Asio Input to a virtual Stereo Audio input on PC
I use an Tascam US-16x08 USB audio interface on my Windows 10 Computer and with programs like Ableton it works fine. But a lot of other programs like 'slack', 'discord', ZOOM, Webex, etc. have a ...
- 1
0
votes
0
answers
133
views
Audio Interface sounds distorted and records only mono
I'm new to audio recording and have been struggling a lot with connecting an audio interface to my macbook pro running macOS Catalina.
I have an M-audio M-track solo. It has two stereo inputs that ...
- 101
0
votes
1
answer
207
views
Merging and duplicating two audio outputs
I have a Steelseries Arctis 5, which allows two separate inputs to be mixed in a "chatmix", allowing me to use a physical dial to make one output softer, which subsequently makes the other ...
- 1
0
votes
1
answer
34
views
what are audio recording formats/types?
i am working on my final year project at the university. I am implementing AI on my project in baby crying detection. the problem is that i am recording live audio using max9814 which gives values ...
1
vote
1
answer
368
views
Can I drive additional headphones from a Monitor Out of my audiointerface without damaging them?
I have a Yamaha AG06 audio mixer / audiointerface connected to my PC.
Currently, I only use the Headphone out 6.35mm headphone out to drive my 250 Ohm headphones.
Now, I want to drive an additonal set ...
- 111
0
votes
0
answers
36
views
Focusrite 3rd-Gen Solo Bundle - Mic Mounted on a Boom Arm Noise Issue
Below is image and voice sample for recording by using Focusrite Scarlett 3rd Gen Solo Studio. Its mounted on a boom arm shock mount. Its got noise. I am touching it then noise goes away but if I ...
1
vote
1
answer
93
views
Ticking sounds in my screen recordings
I have some issues with my home audio setup.
I use a Mac Book Pro and when it comes to gear I use Shure SM7B, DBX 286S, Scarlett 2i2, Screenflow to record screen, and Audio hijack to capture audio.
...
- 11
0
votes
0
answers
1k
views
Behringer UM2 weird white/static noise problem
I have recently stumbled up upon a weird problem with my audio interface. I'm using a Behringer U-PHORIA UM2, with an Audio-Technica AT2020 mic connected to it. When I first got it there was no ...
- 1
0
votes
1
answer
86
views
Should i upgrade my Microphone or my Interface first? [closed]
Good Day,
Im searching for my next upgrade in Hardware.
At the moment i am working with:
Steinberg UR MKII (Audio Interface)
Rode NT1A (Microphone)
KRK RP5 G4 (Monitors)
My Room is sound-treated. As i ...
1
vote
0
answers
162
views
Plug and Play Condenser Mic not working on my USB Mixer Interface [closed]
I recently bought a new condenser microphone online to replace my old BM800. My problem is, the new condenser mic only works when directly plugged into my pc with the 3.5mm TRS connector. It does not ...
- 11
1
vote
1
answer
46
views
How to launch clips from instrument in Ableton Live to USB audio interface for recording
I am trying to record for YouTube and a podcast with a dynamic mic plugged into a 2-channel Presonus USB audio interface. I would also like to launch audio clips from a Monome grid 64-key controller ...
- 11
0
votes
1
answer
376
views
Properly connecting a guitar to audio interface with a pedal
I want to preface this that I'm a total noob and though some answers are similar to my question here, I wasn't sure I understood them.
I've purchased Focusrite Scarlett Solo (3rd Gen) USB Audio ...
- 3
0
votes
1
answer
20
views
I want to get started with modulation recorded audio
In there an app (preferably Android) that can take a audio recording (music, voice, etc.) and change the frequency to above or below human hearing (infrasonic and ultrasonic) and vice versa. I want ...
1
vote
2
answers
5k
views
Behringer X32 - USB input to "Main Mix"
I'm using an x32 rack unit in my home studio as a usb audio interface. In my DAW I see all 32 inputs and outputs. When I create a track and set it to one of the digital inputs I get levels. However, ...
- 13
0
votes
1
answer
535
views
Can I use guitar cables to connect my keyboard to my audio interface?
I have a Yamaha MX synthesizer and would like to record in stereo using the Scarlett 4i4 audio interface connected by two TS cables I use for my guitar. Should I use the TS cables or should I buy two ...
- 101
1
vote
1
answer
215
views
MXL 990 Mic, UR22-MKII sudden breakdown
I was using my Steinberg UR22-MKII, MXL 990 setup for 4-5 months without any problems. But today, suddenly when the mic was connected (and working), the mic suddenly stopped giving output. I couldn't ...
- 113
0
votes
1
answer
94
views
Would it reduce the wire noise if I use DI rather than connecting a guitar directly to interface?
I´m pretty new to this, I´m using a foucsrite interface, and I´m wondering if it is worth it to make or buy a direct box for having a balanced signal in order to reduce noise. I don´t need a long ...
0
votes
2
answers
142
views
Minimizing interface noise floor
I use Ableton, and when using a focusrite interface, without having anything connected to it, I can hear noise if I increase the volume. I don´t know exactly what it is, but I would like to reduce it ...