I'm currently doing a documentary film, and I'm stuck in a sequence featuring a wind farm / wind turbines. Do you guys know how do these things sound like? Anyone have any recordings?
Any help will be very appreciated,
Sound Design Stack Exchange is a question and answer site for sound engineers, producers, editors, and enthusiasts. It only takes a minute to sign up.Sign up to join this community
Good timing with this question as I was recording 80 meter tall Windmills at a windfarm of 133 turbines, a couple hours north of Toronto, just yesterday. This farm supplies 52,000 homes with electricity. I think the city must have been drowning out the sound of the mill @AirbourneSound was referring to as it is near a couple major highways. The ones I was recording are in the middle of farmers fields with no other sounds at all.... other then of coarse lots of wind. As a result they are hard to record because by necessity they are built in high wind areas. I strapped on my Rycote and furry and was still getting a lot of wind in my recordings. They make a whoosh sound quite similar to what I expected they would. Due to complaints of locals near these mills, the little room at their base have been sound proofed so they make basically no noise (this is where the wind energy is processed and added to the main power grid) Here is a sample on my soundcloud page: http://soundcloud.com/azimuthaudio/windmill-with-low-cut Due to the wind I had to put a high-pass filter on these recordings. Both samples are the same Mill. Depending on the speed and angle of the wind there was quite a variety of pitches and tones.
A few years ago I mixed an episode of W-Five (Canada's 20/20 kind of) with a story about people complaining of Windmills near their houses making them ill. There are a couple of audio clips in it to also give you an idea. You can watch it here.
The Sonic Science 'Blow Tools' library has four fantastic windfarm recordings, albeit buried with an obscure naming scheme - just search 'wind generator' and you should find them. And you can purchase them on Sounddogs I believe. On a side note, they serve as a great ambient tone for designing an airport tarmac background.
BLOW02_19_01 - Loop: power generator propeller... BLOW02_20_01 - Loop: power generator propeller... BLOW02_21_01 - Loop: power generator propeller... BLOW02_22_01 - Loop: power generator propeller...
From visiting some wind farms in Southern California for some recording, I'd say these Blow Tools recordings are highly accurate as to what they sound like (on a calm day when you can cleanly record the turbine drone). The day I visited a windfarm there were some amazing, constant 50+ mph wind currents with freak gusts somewhere in the 65 mph range - nice sound in its own right, but not as clean of a situation to capture anything like these Blow Tools files have.
I highly suggest looking into those 4 files as a starting point.
If you're doing closeups of the blades and need an exaggerated 'cinematic' sound, most likely you'll need to design a constant 'rotating' whoosh sound, layering whooshes and carefully spreading the L/R side of your source files to design an appropriate stereo spread which feels wide enough that it has a perceived circular motion. Blow Tools has great source material for designing such large whooshes (by pitching down), as does Tim Prebble's swishes set - especially his hose swishes because of the metallic resonance.
Where do you live? In the UK it's possible to visit them. Dammit, I clearly need to go to one now and record it.
Here's a paper on the noise they create if that gives you any help at all. http://www.bwea.com/pdf/noise.pdf
Actually just a few days ago I passed by the solo wind turbine they have here in Toronto.
I was a bit surprised. There wasn't any apparent noise from about 50 meters away. I expected to hear blade whooshes, thumps or something similar for blades of that size.
The only sound that I did hear, just beginning to be apparent when I was about 10 meters away, was a fan coming from the base behind a vented door - I assumed for cooling the interior machinery. But nothing from the huge blades themselves.
If you need a reference tone to recreate something similar, send me an email and I'll grab a recording this week. Can't promise it will be clean as there is traffic close but if it is helpful let me know.