0

I bought Swissonic Sub10 and it makes "pop" in my monitors every time it goes into standby mode. It's so annoying and maybe even harmful to my speakers. Does anyone know how to get rid of this option? What should I unpin or desolder?

Thanks!

1 Answer 1

1

You need to avoid running your front L/R through the sub. Send to them separately.

It's a design fault in the unit. If it's new you could send it back.

From the reviews at Thomann

My only gripe is that the power saving feature is nifty, but using the satellite outs from the sub causes the satellites to pop every time you wake the sub from sleep mode, which isn't great. avoided the problem by using a Presonus Monitor Station 2 which allowed me to hook up the sub and my main speakers to separate outs.

6
  • how to avoid running L/R via sub ? That's how sub crossover works.
    – Tony
    Commented Aug 30, 2021 at 11:08
  • The crossover isn't actually a crossover, it's a high-pass filter, so it does nothing to the pass-through.
    – Tetsujin
    Commented Aug 30, 2021 at 11:08
  • ok so if I connect them separately to my Fireface UCX and turn up all the way subwoofer crossover knob to 180 Hz and then put LPF on it in my TotalMix at 80Hz and also put HPF at 80Hz for my monitors it should do the work? (စ‿စ )
    – Tony
    Commented Aug 30, 2021 at 13:01
  • I don't know, as I've not used any of that equipment. Try it & see.
    – Tetsujin
    Commented Aug 30, 2021 at 13:07
  • I'm sure it will work but I don't know if it won't cause any hidden issues.
    – Tony
    Commented Aug 30, 2021 at 13:12

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.