0

I am trying to capture stereo audio with two lavalier microphones. The microphones are the Rode SmartLav+, which has a 3.5mm jack that I believe is TRRS, it works directly with phones. My audio recorder is the Tascam DR-40X, which has two ports which take either XLR or 1/4 jack. My assumption was that I could adapt the 3.5mm to a 1/4 jack with no issue, but that proved not to be true. Since then, I have tried using a stereo to stereo adapter and a 3.5mm stereo to 1/4 mono adapter. Neither produced a signal, so I got TRRS to TRS adapters, and tried again with both the 3.5mm to 1/4 adapters, again with no signal. Is there something I am missing? Or are the two ports on the recorder not mono? Let me know if there is any useful info I can provide, I am very new to audio.

1

The Rode SmartLav+ is a high impedance [high-Z] mic, suited to computer headset/mic inputs. It also sounds like the pin-out of TRRS is designed to not confuse a computer's headset input. It's not really built for pro audio.

Your Tascam, based on the plug input types [I can't see any real spec on their web page], is expecting a professional low impedance [low-Z] mic.

I really don't have much experience of consumer-type mics.

Low to high-Z transformers are common, but I'm not finding anything for high to low-Z. https://www.thomann.de/gb/special-adapters.html has reams of adaptors of varying types… maybe you'd find something in there. [I have no affiliation with that particular store, just that Thomann is just one of the biggest musical "box-shifters" in the EU, so they're always a good place to look for things.]

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.