1

so a little while back a few weeks, i bought a neewer-NW800 to record with on my computer, when i got it it was hissing like crazy and my voice was super low, so i looked into it and apparently you need a power source externally from your pc. So i bought that, i fixed the low sound issue but not the buzzing/hissing issue. It uses a 3.5mm jack. I looked online again and most people say you need a "USB audio interface" to remove buzzing completely, is the Scarlett 2i2 good to remove the buzzing/hissing?

Here's me doing a snap test

I am on a budget. What would remove hissing/buzzing?

0

Modified from my answer at https://apple.stackexchange.com/questions/322301/xlr-microphone-not-working-with-phantom-power-supply

You still need a microphone preamp.

As always seems to happen with these mics, they are bought by people for whom it is their first venture into the audio field, beyond a headset mic.

Unfortunately, nothing in any of these ads tells you precisely what you are going to need - nor do they even supply the right cables in the box to be able to do it.
Theoretically, you can get a signal out of them by using a PC's built-in low voltage supply that can power headsets.
In practise, that really doesn't work well at all - so then people buy a phantom supply, without realising they still really need something to get the signal into the computer at good levels.

If you bought a separate phantom power supply & can return it, do so, you don't need it.

Even on the picture for these supplies it shows you need to connect it to a preamp.

enter image description here

Preamps are readily-available with built-in phantom power & USB connection.
They become the instant bridge between your mic & your computer. They supply the correct phantom power to the mic & become a useable input for the computer.

Get anything like the following list obtained by Googling "USB Phantom" -
Random selection on Amazon
Example -

enter image description here

They run from approx £30 to many hundreds, depending on number of inputs/features etc.
All you need as a basic starter kit is 1 mic input with phantom power.

You also need a male-female XLR cable which will connect to the pre-amp's mic input, which those mics are not supplied with.

enter image description here

  • Thank you very much, so the Scarlett 2i2 could do what i need? Is it good? – Anders Apr 21 '18 at 11:49
  • Should do. I've not used anything by Focusrite in a long long time, but people seem to like them & they're still around decades after I last used them, so presumably they're fine. – Tetsujin Apr 21 '18 at 11:53
  • Thank you! I had no idea about any of this so its loads of useful info. i appreciate the help very much – Anders Apr 21 '18 at 11:55
  • Most welcome :) – Tetsujin Apr 21 '18 at 11:56

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.