AFAIK 4 tracks can be recorded on a compact cassette as the recorder uses both the channels of both the A and B side of the tape. But how does this Tascam 488 recorder records 8 tracks onto a compact cassette that only has 4 'tracks' ?

1 Answer 1


This is a common misconception about tapes and tape recording.

Tape is a magnetic medium and it's not divided by anything.It's particles are (at first) scattered and unordered.

What dictates the channel count is the recorder tape head.

This is a basic example of how the tape recorder works: enter image description here

So for example let's say we have a 2 inch tape.

And let's also assume we own 2 machines.

An old MCI 2" 16ch , and a studer a800 2" 24ch.

That means that both machines are loaded with the 2 inch tape but the first will record 16 channels and the 2nd will record 24 channels.

After one machine has recorded let's say 16 channels (MCI) we can then easily take the tape out of that machine, load it in the studer and record 24 channels (16 previous are overwritten of course).

This is as far as recording goes.

For the reproduction there are the same number of channels in the "Repro" head.

Both heads must be aligned very well so there are no repro and/or recording problems.

So as you'd understand by now , a cassette is a tape only 1/8" width but it's the exact same technology as the 2".

On the "normal" cassette decks this is what's going on:

enter image description here

You can also check more Tape Layouts Here

A Revox Tape head of 16 channels:

The illustration shows a REVOX stereo sound head side by side with a professional 16 track head for 2 inch wide recording tape.

So you might wonder why we can't record 24 channels in a 1/8" cassette. Well , first of there are physical limitations. Also the tape would have a lot of crosstalk as one channel would affect the other because of the very small channel width. And lastly there would be too much noise, this is why smaller tape formats use denoisers as a standard , The 488 example uses dbx denoiser and others like Fostex 250 uses the Dolby S.

So narrow tape path means:

  1. More noise
  2. less Headroom
  3. possible crosstalk

But as we discussed before a lot of these depend on the machine! There are larger format machines that have crosstalk and vice versa.

Other formats like 16ch 2" , or 8ch 1" are considered simply as the holy grail of recording as they help by offering great depth , dynamic range , headroom and noise characteristics.

So keep in mind that for the most part , the machine dictates the outcome, the tape is just a medium that the "data" is saved if you will.

Feel free to ask questions :)

  • Hey frcake. I read a bit about the 488 and the problem with using these cassettes for 8 ch seems to be low bandwidth and slight bleed between the channels. Is this common for all multi-track cassettte recorders?
    – n00dles
    Commented Mar 15, 2017 at 2:51
  • @MarcW , Hey Mark! Well , I would suggest going for a 4track like a 424 but the 8 track would also do! These machines have great sound and lately there's a whole hype around them, but they are truly great machines. About the crosstalk, well i wouldn't worry about it , i have avoided 8track cassette and gone for the 4track , but if smn wanted an 8track,i'd sure say go for it. For me the #1 reason to buy a machine like that is creativity. So many cool tricks you can do , jack it up record and have fun. I mean serious fun!I own the 246 and 388. If you want any help hit me up [email protected] .
    – frcake
    Commented Mar 15, 2017 at 3:42
  • And to directly answer the crosstalk question in my 246 every channel is crystal clear in terms of crosstalk. The dbx denoiser has a great vibe and saves you a lot from compression (dbx: Compander: Compressor / Expander with high frequency pre-emphasis and de-emphasis at the end for noise suppression) But the whole thing craves for recordings! Check an example record from B. Springsteen - Nebraska . A portastudio 144 & 2 X sm57 in a bathroom. :) great fun!
    – frcake
    Commented Mar 15, 2017 at 3:47
  • @frcake But what are the disadvantages of narrowing the channel width of a single track? ('normal' recorders use the whole width of the tape)
    – user152435
    Commented Mar 15, 2017 at 7:36
  • @user152435 , i edited my answer see if it's any better. Normal recorders are a 4 track in essence but the recorder/reproduction head only affects the 2 of the 4 channels. And when the tape is flipped(Side B) you have 2 more clean channels to record your L/R stereo! So , in essence a 4 track configuration/layout , by exploiting the cassette alignment with the classic side flip but only a 2 channel head.
    – frcake
    Commented Mar 15, 2017 at 12:45

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.