Here's what I have going in lieu of a wet/dry mix knob.
I'm using the pre-fader send and a submix bus to mix my clean and effected (outboard) signal.
I'd rather assign a single knob to handle each wet/dry submix. Having to pull two faders on my controller to mix wet and dry signal is not ideal.
For example: I should be able to go from 0 (100% Bus 1, or totally dry) to 64 (50% Bus 1 and 50% Bus 2 aka wet/outboard) to 127 (100% Bus 2) on a single knob or controller assignment.
There must be a more elegant solution. Any recommendations?