I came across audio interfaces while researching for microphones with semi-professional recording quality. What wasn't clear to me, and I couldn't find the answer by reading the specifications of those products, was weather or not the audio output from those audio interfaces included the sounds of applications being used in the computer to which the interface is plugged. I am not specifying an exact interface because I didn't pick one yet; the answer to this question will greatly affect the choice. I am looking for USB interfaces, but preferably not powered by it (Don't know if that makes a difference when answering the question).

Thanks for your time

4 Answers 4


Nowadays, almost every audio interface has a driver with additional options that either expand upon or work separately from your built in audio driver so it will vary from product to product so you would have to check with the ones your interested in.

My Akai EIE Pro, for example, when used in Ableton can be set to have it specifically use any of the inputs and outputs or all of them. Even further, it lets me specify what inputs and outputs to use on each individual channel. Each DAW is different too but as far as I know, every DAW exports audio without any interference from outside audio sources (running applications, computer sounds, games, etc) making the point of whether or not your audio interface plays these sounds irrelevant. It would be a terrible design flaw if this weren't the case. Of course the only exception would be if you are using ReWire with an external 3rd party application. I do this occasionally with Ableton into Reason or vice versa since Reason doesn't support VSTs or other types of 3rd party plugins.

It also depends on if you have a Mac or PC. Macs have a utility in the applications folder called Audio Midi Setup (Applications/Utilities/Audio Midi Setup) which allows you to directly control your input and output channels. I have mine setup to play my computer sounds made by the computer itself through the internal speakers while having all other audio play through my monitors plugged into my EIE Pro.

If you were on a PC, it would all depend on your driver. The built in audio driver (which is not very good) has quite limited options on what lines in and out can be used since it only has one major input and output source. It is more than likely that your specific audio interface will come with its own driver to create additional options for the inputs and outputs. You might even have a 3rd party audio driver which already has these options. For example if you have the ASIO4ALL universal audio driver, it automatically is set to only play sounds from the application you currently have open and in the forefront. Other drivers have this feature too, so look into that as well.

I know back when I had a (very) old version of Realtek High Definition Audio Driver, it was a HUGE pain to get it to work with my MicroKorg. Even after purchasing an extremely simple midi-interface to try to circumvent using the audio input option, it was still a huge pain in the butt getting it to work and wouldn't even work consistently whenever I tried to use FL Studio. It could have been the driver, FL Studio, or even both since this was about 5 years ago and the software wasn't even close to as good back then.

I hope this points you in the right direction.


This ultimately comes down to the specific interface's drivers, but generally the way it works is that only the audio from the application that is specifically using the interface actually comes out the interface. So if I'm using Reaper and I've got my Presonus interface selected, only the audio from Reaper comes out the Presonus - my other system and application sounds (such as things I play in iTunes) default to using the internal soundcard because that's what is currently selected at the operating system level.

Now, there are always exceptions - there's nothing stopping a manufacturer from writing a driver that routes all system sounds to the interface in addition to any audio specfically targeting the interface. But this is not, in my experience, generally the case with recording hardware.


It will only possible to answer for specific audio interface, of course...

In general, it's only possible to say that yes, probably all audio interface has inputs and outputs, so it can output sounds from the computer.

Unless you choose an audio interface that uses just specific software, it should be able to play sounds from your computer.

Example: Saffire Pro 40 states:

Unmatched routing flexibility

Saffire PRO 40 is the most flexible interface in its class, able to adapt to any recording session quickly and intuitively. The user is able to route any input signal or DAW output, or a mix of both, to any of the 20 outputs.

Where DAW is :

A digital audio workstation (DAW) is an electronic system designed solely or primarily for recording, editing and playing back digital audio [...] Modern DAWs are software running on computers with audio interface hardware.[1]


Like others have said, it depends on your interface, DAW, and OS. I use Universal Audio interfaces on a Mac. The UAD Apollo will default to playing the system sounds, input, and output automatically when turned on. If I don't want system sounds to record, I have to go to Audio MIDI Setup and send the system sounds elsewhere whilst recording. I recommend downloading Soundflower and sending them there if you don't care about hearing them. They'll just go off into nowhere that way. If you do need to hear them, send them through your system out. Just be aware that if the computer is near a mic, it'll pic up the sounds. Once you know where you want them to go, just right click that device in the left-hand column and tell it to send the system sounds there.

If you're on Windows, I don't know. I think you may have to mute the system sounds if your interface doesn't ignore them, but the last time I worked with Windows was around 2000 except for an experiment trying to use it for audio. That lasted a week.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.