Can anyone explain mastering? What is it for and why should anyone care? Should I have all of my recordings mastered?

2 Answers 2


When mixing, you are making sure that the stuff you recorded sounds perfect on your studio monitors inside your quiet control room. When mastering, you are making sure that the mix that sounds perfect on your studio monitors, is going to sound decent in your home, your car at route 66, the crappy loudspeakers that came with your PC etc.

When mastering, (and taking it seriously), you listen to your mix on more than one set of loudspeakers, I normally listen to a pair of monitors, a pair of good hi-fi loudspeakers, a pair of cheap plastic crappy sounding speakers and a pair of headphones. I then take care of the dynamic range of the mix (depending on the type of music you could either add a compressor or a limiter that can just squeeze the dynamic range to a level you want). I also check whether I am happy with the low frequency balance of the mix, that depends on the loudspeakers that the mix was made with. Sometimes you need to do a bit of equalizing using a linear phase EQ (so that all the stereo-related stuff stays intact.)

Depending on the room where you mixed and mastered, it can even be the case that you add a very little reverb to the mix while mastering.

When producing an album with all seperately recorded tracks that are all individually mixed down, the situation can raise that there are substantial differences between the individual tracks. To some extent it makes sense to start seeing them as one group of related tracks, and use the techniques described above to make the sound of each track a bit more similar to the others.

There are discussions as to whether this step belongs to mastering or to the final stage of mixing, but adding dither signal, downsample and reduce resolution to prepare your track for publishing on for instance a CD. If I recorded on 96KHz/24 bits, I normally check every now and then if this stage is not messing up my recording while mastering my tracks.

General rules:

  • Never change a mix while mastering. Try to use a 2-track source to master with. This is probably the most difficult thing to understand and do, but at the stage of mastering, the mix should be in order, and therefore the wrong place to fix things.
  • Try to change your environment as much as possible. Listen to your master on different type of loudspekers, try a different room, or - the best - different ears. That's right, ask somebody else to master your tracks. Fresh ears are invaluable at the stage where you already listened to the track for hours, if not months.
  • Always check what your master sounds like through headphones. Most of the listeners are using these, so ensure yourself that you know what you sell these guys.
  • edit: added info on dithering, downsampling and reducing bit resolution.
    – Pelle ten Cate
    Commented Dec 8, 2010 at 13:09
  • 2
    I thought that part of mastering was also to make the different tracks sound "coherent" when put together as an album: so that the listener doesn't want to adjust the volume for each track. Is this true?
    – jan
    Commented Dec 8, 2010 at 20:14
  • Agreed! Added that in.
    – Pelle ten Cate
    Commented Dec 8, 2010 at 20:26

A great book on mastering is "Mastering Audio - the art and the science" (second edition) by Bob Katz. I'm looking at my copy right now and remembering how much I enjoyed reading it, even if I don't have the equipment to do what he's talking about.

  • 1
    +2 for mentioning Bob Katz. :)
    – dwwilson66
    Commented Apr 26, 2012 at 2:06

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.