Sound Design Stack Exchange is a question and answer site for sound engineers, producers, editors, and enthusiasts. It only takes a minute to sign up.
Sign up to join this community
I've been using the "new" Behringer X32.
Occasionally, and still without knowing exactly why, I get a digital feedback and the master volume goes to top. No specific frequency, just a digital feedback. Some of the times without me touching anything.
I have a hint it's related to the effect BUS since the X32 has both effect in & out faders. Anyone has had this problem and has a solution/explanation to it?
This is often caused by accidentally sending a FX Return channel back into the Bus that is feeding the same FX processor that return is coming from, creating a loop. Select your FX Return channels and view the HOME screen, which shows you all of the 16 Bus sends for that channel on the right. Make sure that for each FX return, there is no send level to its corresponding bus. For example if FX Slot 1 is being fed by Bus 13, which it is by default, make sure that FX Return 1 is not sending any signal to Bus 13. Check this for all 4 stereo FX returns. Hope it helps!
