I just got some pretty terribly recorded dialogue with a lot of hiss on the track and have been trying to get rid of it with C4 and RX denoiser but I can't seem to completely get rid of the hiss. Not to mention it's incredibly distant and this is the only take...Any suggestions?
asked Jul 26 '12 at 19:38
Add a comment
|
You should be able to work some magic with those tools with a bit of patience. Apart from getting your hands on a CEDAR or ADR-ing it, you might get something half decent to work with.
Heres what I did in 3 mins using RX: http://soundcloud.com/andrewjohnlewis/noisy-dialogue-2
Very rough, but with some finesse you could get somewhere there I'm sure.
-
-
1Yup. On the D setting and tweaking the curve settings on the advanced tab bit. 2 passes with about 5db reduction each time – Andy Lewis Jul 26 '12 at 20:44
-
Thanks Andy. After a while it seemed to do the job. I had never fooled around with the advanced tab before. – Mitchell Scott Jul 27 '12 at 17:52
-
