0

Hi,

I've been having problems with my clip mics for a little while. I use the Audio Technica ATW- T1801 mics and seem to have a lot of problems with noise. The noise floor is higher than I would like anyway but intermittently I get a kind of "pumping" noise when any speech is delivered. This doesn't happen all the time which makes it even more of a pain.

Here's an audio example

[audioboo]750487-noisy-clip-mic[/audioboo]

Does anyone know if this is interference? maybe something wrong with the receiver? or maybe just old/bad mics? I'm not always here when the recording is happening so there could be an amount of user error in there as well!

1

Hey,

It is devinitely either:

  • week RF transmission => change freq and try again

  • low batteries (seriously) => change :-)

Each system behaves differently. So what hardware do You use?

  • Thanks Larry, I'll try these things out. In terms of hardware, we often go straight into the XLR connector on the Camera. Not ideal I know, but we don't have too many other options. – TheDiscoKing Apr 25 '12 at 14:27
0

The pumping that you hear is probably the "Squelch" function engaging in the wireless system. This is basically a noise gate for RF transmission that cuts out the signal every time the signal gets too weak. The system could also have a built-in audio noise gate that is causing the noise to pump. Like Larry said, a better RF signal will help.

If you have the ability, you might try to connect the mic directly to the camera and bypass the wireless system to test if the mic is adding significantly to the noise.

Cheers, ~Matt

0

matt, totally true, but

squelch can sound differently especially on sennheiser systems. there might have been interference due to very close freq usage of a different system. or if it was an audio ltd. system, then it was the low battery....

So what system was it, disco king?

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.