3

I purchased my Lectrosonics SMV's a while back but had immense issues trying to get them to work with my Sennheiser MKE2 Microphones and the M150's that I purchased with the lectro's simply did not come close to the quality of sound that the Sennheiser's gave me.

The local (I'm based in Johannesburg, South Africa) Sennheiser and Lectrosonics agents could not help me, nor give me the time of day as to how to wire the mics up correctly. The Sennheiser agnets couldn't even tell me that the microphone was a positive bias 2-wire electret! When I asked them if it was, their answer was "Um...I dont know"

Improve this question

1 Answer 1

Reset to default
2

THE OP HAD ANSWERED THE QUESTION IN HIS QUESTION... JUST MOVING TO AN ANSWER. CREDIT GOES TO @AndreFeldmann

To cut a long story short, I finally found an electronics engineer who specialises in Sennheiser products and he was able to give me the correct configuration! See the diagram below!

enter image description here

Improve this answer
1
  • I have also some smq and smqv transmitters and Mke2 lavaliers, but when I touch the cable of lav apears noise ( seem to be to sesitivy) do you have experince that problem ? As you know cable has 3 wires one red color , one blue color and shield , i connected shield and blue to pin 1, red to pin 3 , and pint 2 to pin 4 , i have also m152 lav lectrosonics iit has not that nosie , could you please let me know email fron the sennheiser engeenier and email as well, Any help will be apreciated Jsoe luis martinez [email protected] Mexico df.
    – user7342
    Feb 1, 2014 at 17:14

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Not the answer you're looking for? Browse other questions tagged or ask your own question.