Take the 2-minute tour ×
Sound Design Stack Exchange is a question and answer site for sound engineers, producers, editors, and enthusiasts. It's 100% free, no registration required.

Since we're all about information sharing on this site, I thought it might be interesting to have a thread to collect debunked audio myths. Who knows what wacky claims you've heard in the past, or what genuinely relevant information you may have stumbled across that others haven't.

Two examples for you:

  1. Transformer-less microphones are better - They're not necessarily better. transistors are just cheaper to produce than an equivalent transformer. The right transformer can sound amazing, though you're going to pay for it [sometimes dearly....lol]
  2. M/S is mono-compatible - This one stems from a conversation I had with a buddy at AES last year. He argued, and I now agree with him, that "compatible" is the wrong terminology. You still have phase cancellation, potentially eliminating sounds. "Mono-predictable" is a more accurate description. [Splitting hairs to be sure, but still accurate none-the-less.]

So, in the interest of public discourse and the redistribution of knowledge....what else you got?

share|improve this question
    
I could see this on David Letterman "Ok everybody, here's tonight's Top Ten list, Top Ten Audio Myths... –  Utopia Jul 26 '11 at 17:49

14 Answers 14

The BIGGEST Audio Myth EVER "We can fix it in Post."

share|improve this answer
    
we can recreate it in post. –  VCProd Jul 20 '11 at 2:45
    
^ That's Foley and ADR. –  Miles B. Sep 2 '11 at 7:41
    
HA! bang on! +∞ –  audiLe Sep 10 '11 at 19:25

Here's one:

Foley miking must be pretty tight on the prop and must be hyper clean.

In fact, lots of really great sounding foley ends up being miked from 3' to 6' away. Adding a little distance to the mic position makes mixing that much easier because the perspective is much closer to what you need the sound to be, and because it naturally loses any proximity effect and off-axis effects that could mess with you.

Also, re: cleanliness - it really is amazing how much noise you can get away with when cutting foley. Its important to always cut in context, because doing so will give a clear indication as to how much cover one has in the foley room. This is not to say that one should be sloppy with regards to noise, but more to say that one should be obsessing over performance far ahead of obsessing over noise floor.

share|improve this answer
    
absolutely. don't sweat the noise too much until you hear it in context. masking is a beautiful thing when it works to your advantage. –  Shaun Farley Jul 18 '11 at 13:36
1  
Definitely agree. I love a bit of dirt in my foley. –  Roger Middenway Jul 18 '11 at 16:12
    
@Rene What do you mean by "off axis effects that could mess with you"? I thought if you moved a mic away from the source you'd get more ambient off-axis coloration? Not challenging, I totally agree with you, I'm just curious. –  Utopia Jul 26 '11 at 17:19
    
@Rene and to go further with that topic, I sometimes have to look for random noise and environmental noises because when a scene is edited without putting ANY noises or natural sounds that happen out there in the real world, it sounds so fake to me. When someone moves in their chair, THEY MAKE NOISE. It's perfectly fine to have clicks and things (of course from the source and not something digital or distortion) because it makes it so much more realistic and believable. So true. –  Utopia Jul 26 '11 at 17:21
    
re: the off mic thing - if the mic is further back then the sweet spot on the pickup pattern is wider, so movement in space doesn't give away mic position as quickly as when the mic is right on top of the prop. –  Rene Jul 26 '11 at 21:01

Some great answers!

My own personal favorite:

Good Sound Design of a movie begins after we are finished shooting and the film has been edited.

I personally believe that having good sound design begins with the script and a scriptwriter/director thinking with sound design throughout the whole pre-production and shooting process.

--

A myth I used to personally believe myself before I started doing more and more recordings with these little critters is:

Lavaliers sound horrible. Don't use them at all. (I do agree with choosing a boom over a lav but when it's all you've got, it can be sufficient!)

But, they really do work if you know what you're doing and you spend a bit of time learning how they work and what they sound like and where they sound best on the person. Like all microphones, there are poor quality ones and good quality ones. The COS-11 I've been using sounds great when used correctly.

I used to never think of using them and only using the boom (which I still do use most of the time) but when it's not feasible to record with one like in a cramped room or outside in a wide shot, they actually do work when you use them correctly. I was shocked to discover that most of the dialogue in The King's Speech was recorded with lav's. I had no attention on the voices in that movie - they sounded great!

and:

Just about anyone can do the boom oping. Use the PA - he's just standing around doing nothing.

So not true. It takes incredible skill and timing and attention to do a superb job of boom-oping. I've seen a poor boom-oping job done by an inexperienced person who meant well but just didn't have any training and the director thought "anyone could do it" and it ended up costing about $10,000 extra dollars for ADR recording and editing fees. From what I've experienced in the indie film scene is that more often than not they give the job of positioning the microphones for their movie to someone with very little if any experience and it bites them later.

A beefy gun sound comes from ONLY the closer microphones. You don't need to record from farther away.

Almost true, closer mics sound great, but you should always get a long perspective because from my experience some of the beef of a gun comes from the echo rather than the direct sound. For example, try recording a whip crack in a dead room. It sounds like you're snapping a pencil on your finger. You need some acoustical support to make something sound huge and natural, IMHO. This is definitely true in music recording and mixing.

All actors perform perfect ADR. They're actors, right? So if we book them for an hour to do 80 measly loops, they should finish before the hour is up and we can all go get a drink.

In my humble experience, I've found that the actors who are the best at ADR have a strong sense of musical timing and ability to duplicate pitch and tone. Not everyone can do this.

Good ADR is close-miked and noiseless. When you close-mike a voice (2 inches from mouth), you can just roll off the low-end and add reverb and it will make it sound farther away!

As always, depends on what your source material is, but in my experience when someone has told me this and we've done it that way the closer, deader mic is always the toughest one to match in with production dialogue. Put the mic back a foot or even 2 feet - the proximity effect is the arch nemesis of matching ADR to production sound.

I was so sure you audio guys could fix this interview audio where the hiss is louder than his voice, the interview was done next to the waterfall, and the auto-gained track, so I didn't bother to consult you about the audio quality before we went ahead and edited the video. Here you go. Needs to ship tomorrow - I told the producer you guys are FAST!

share|improve this answer
    
yes, yes, yes, and yes! re: ADR - i've always found that a good actor can do around 10 cues/hr; how's your experience there? and Auto Gain Control should be illegal. –  Roger Middenway Aug 3 '11 at 18:26
    
@Roger Thanks! That is about right. To get it perfect, it's about 10 an hour depending on length. However, I do work with the voice talent for the E! TV channel in Italian and that guy is so good he can do about 100 loops an hour (granted, it is an overdub, but he is so fast it's scary. I wonder how good he is looping in his own language). His name is Luciano Palermi. He's based in LA and does video games and dubs E! Best Italian voice talent I have ever met. –  Utopia Aug 8 '11 at 20:33
    
Great post! I've been told that actors average about 6-8 lines per hour and tends to be what I gauge when I'm prepping my cue sheets - has seemed to be pretty dead-on whenever I've had to shoot ADR. –  Stavrosound Aug 10 '11 at 9:46
1  
For ADR I've also found dynmaic compression to help with matching production - it's my secret sauce. Usually the ADR has too wide of dynamic range, so when you crunch it with something like the Waves C1 and do A/B comparisons until the timbre "feels" right against production, the matching process has seemed to move smoother. –  Stavrosound Aug 10 '11 at 9:48
    
@Stavrosound Wish I could sit in on one of your sessions one of these days to see how you match it in! Sounds really awesome. –  Utopia Feb 2 '12 at 0:21

Although according to Frank Zappa, apparently just as big of a myth is that "we can fix it in the shrinkwrap"

One of my favorites though - "Picture is locked"

share|improve this answer
    
That should be tied with "Fix it Post"! –  Sonsey Jul 19 '11 at 20:16
    
HAHA! Coll Anderson and I have had some fun conversations on that topic. –  Shaun Farley Jul 20 '11 at 1:03

Oh I read this one the other day: "I use a convolution sample of an anechoic chamber in my convo reverb to remove room reverb from location sound, when I mix the dry and wet signals it cleans it up"...

If you run a sign sweep in an anechoic chamber you will only get the "colour" of the speaker playing back the sweep as there are no reflections in the room to deconvolve...so if you are replaying on the same speaker then you may hear a difference but...bad theory dude

share|improve this answer
3  
wow! the disregard for science and what reverbs actually do in that one makes my head hurt. –  Shaun Farley Jul 18 '11 at 22:16
1  
wow. I once had a client dupe a mono recording and put it on a stereo track in protools because he thought that made it sound "wider" :) –  Rene Jul 18 '11 at 22:20
    
you should hear what some so called "pros" here in Greece say about such things... Not only your head but your whole body is in pain when you hear these things... And the worst part is that you might have to listen to this crap cause you are they pay you! –  Nikos Chatzigeorgiadis Jul 20 '11 at 17:34
1  
@Rene he forgot to nudge one side a few frames left or right!!! –  Utopia Jul 26 '11 at 17:17
    
LOL at Rene's comment, and +1 to Utopia ;) –  Stavrosound Aug 10 '11 at 9:50

Having really nice speakers makes everything sound good.

share|improve this answer
    
True, there is quite a lot of content I avoid listening to on my Genelecs. I have an old Sony micro system which "smears" the content very nicely. –  Iain McGregor Sep 7 '11 at 18:17

Alright, no one has mentioned this one yet so I'll throw it out there:

If you're going to be doing a lot of processing to a sound, you should convert 16 bit files to 24 bit before doing so.

I'm not referring to recording in higher bit rates (that you should do), but working with existing 16-bit files. Most of the programs we use (Pro Tools, Nuendo, etc.) work natively with 64 bit mix engines. [There may still be some that are only 32 bit, but I don't know for sure.] When you bring a file into a session, the DAW automatically pads the audio file anytime it does processing...including something as simple as volume automation. That means that a 16 bit file in a 64 bit DAW gets an additional 48 bits (added on as zeros after the existing word) to allow for more accurate math. If you were to convert the file to 24 bits first...yes, it would get 8 extra bits, but they would be all zeros. Bring that newly converted file into your 64 bit DAW, and it gets another 40 extra bits (all zeros again) anytime the DAW does any processing. You're still totaling 48 bits of padding zeros prior to processing. There's absolutely no difference.

The only time it matters is when you're actually exporting or bouncing your audio from your session. [I suppose that I should admit that if you're rendering within a session, i.e. audiosuite, it may matter. This one I'm a bit fuzzy on.] If you're doing any kind of processing to an audio file other than simple cuts (volume, pan, fade, plug-in, etc.), you'll actually get better quality final files by outputting at 24 bits than at 16 bit...even if the original files are 16 bit.

That's the biggest reason you're supposed to dither anytime you're outputting to 16 bit, even from a "16 bit" session...because the DAW actually does all it's calculations at much higher bit rates.

share|improve this answer
    
Pro Tools is still 32bit I think. Can't be much longer till they do a 64bit version. Guessing once they iron out the Lion bugs! –  Andy Lewis Jul 22 '11 at 13:22
    
@Andy - whoops, i was referring to the mix engine...not the computer processing ability...though the different levels of pro tools do use different scale mix engines i think...and then there are differences for plug-in dsp as well. thanks for pointing that out though. i've edited my text. –  Shaun Farley Jul 22 '11 at 14:42

The classic - "You need to use all the bits when recording digitally." O RLY?

Another related myth - "Analog gear has more headroom."

A favorite of mine - "It's better to record at 88.2kHz instead of 96kHz because the math is simpler." Seriously, when was the last time you needed to put ANY effort into calculations BY YOUR COMPUTER. :D

Last one - "What's the point of recording at higher sample rates if it's just going to be played back as an mp3 through a 1" ceramic speaker?"

share|improve this answer
    
re: the 88.2 thing - I'm no expert, but I think most resampling algorithms move into the mHz range to do their thing, rendering math arguments dead on the spot. :) –  Rene Jul 19 '11 at 1:57
    
re: mp3.. if you're writing hip-hop songs, i can see how this could be understandable.. you're writing ring-tones! –  VCProd Jul 20 '11 at 2:47
1  
I personally hate when I mix an album knowing that 98% of the people out there will hear it through those little white Apple headphones which roll off at like 14K or something. –  Utopia Jul 26 '11 at 17:01
    
same here but I also know an engineer that can get great mixes primarily working on those stupid earbuds. –  AGZFX Jul 27 '11 at 0:31

More from the music side : "louder sounds better".

share|improve this answer
    
Loud music stresses me, I will for sure walk out of places if the music is to loud. Said that, it is also true that our frequency perception becomes more even at louder levels. –  Eric Baca Dec 1 '11 at 23:39

My favourites,

"Nothing changed during the online." "We changed/moved picture but it won't affect sound." "I just have a few notes" "I'm sure our (picture) editor knows how to export an OMF."

share|improve this answer
    
I've experienced #2 trainwreck an entire reel. True story, more than once ;) –  Stavrosound Mar 2 '12 at 20:06

This is a great video about more technical myths of audio.

http://www.youtube.com/watch?v=BYTlN6wjcvQ

share|improve this answer
    
I think I actually sat in this session! –  Shaun Farley Sep 4 '11 at 13:24
    
Nice link! Some interesting stuff there. Know of any other similar seminar links? –  Andy Lewis Sep 4 '11 at 14:45

Making it louder makes it more exciting.

share|improve this answer

ok one basic...

in foley and sound design equipment does NOT play a huge part

o'rly?

share|improve this answer
6  
i don't know man. tools are just that...tools. sure, the better ones make your life and job easier, but that's really only talking about speed and efficiency. the stuff ben burtt used on star wars all those years ago didn't have anywhere near the capabilities that we have now at a fraction of the cost. –  Shaun Farley Jul 18 '11 at 21:08
1  
I'm going to disagree with this and agree with @Shaun. A talented sound designer can work with very basic tools to create a very nice mix. I'd always like the most plugins, the best source audio, and the finest machine to work on, but really... if you have some baseline quality (as in, not using a cell phone to record your foley), you can do a lot with a little. DAWs like Reaper and recorders like Zoom H4Ns really blow the equipment myth out of the water. –  VCProd Jul 20 '11 at 2:50
    
I agree with both of you. It is true though that in Sound you need to spend way more money than the other fine arts. Sound is so much "material dependent" in terms of equipment and the quality of your equipment is based on the materials used to make it (check mics for example). A graphic artist need a PC/MAC + Tablet + software at the most! A sound guys need many many more things to work... –  Nikos Chatzigeorgiadis Jul 20 '11 at 17:32
    
I have to disagree. Regardless what kind of art or design you do, in most cases the costs are about the same. A graphic artist needs much omre than just a PC; think of all the paper, pencils (which can be really expensive) and of course you have to calibrate your monitor from time to time. Unless you run a big mixing stage...I think all those art/design jobs will be at a simular cost level. –  Michael Manzke Jul 22 '11 at 10:08

What about talking of volume when referring to SPL? I have heard the only thing you can measure in volume when working with sound is tea or the room. This is because volume is not a measure of intencitiy.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.