Sound Design Stack Exchange is a question and answer site for sound engineers, producers, editors, and enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I'm looking to get an in-line pad to have part of my gear, no specific needs. My main mic I would be using it with is the MKH 418s. I have a few questions:

  • Does a cheaper pad add much noise to the signal?
  • Does one get stereo (5 pin) pads? Or do I need to buy two separate 3 pin XLR ones?
  • I'm getting other gear from B&H, so out of their stock what would you recommend?
  • If you had to only get one, how many db attenuation would you go for?

The cheaper the better, but I really don't want to add noise to my signal.

Thanks for your input.

share|improve this question
up vote 1 down vote accepted

I always keep at least one Audio-Technica AT8202 in my bag. I've used them on my hydrophone and even the MKH50, and I can't hear much (any?) additional noise. the AT8202 is switchable betweeen -10, -20, and -30 dB; pretty darned spiffy.

Audio-Technica in-line attenuator

share|improve this answer
I ended up buying two of these. Thanks for the input, they seem like good value. – Andrew Spitz Apr 18 '10 at 22:01
Thanks for the image addition, Iain! – NoiseJockey Apr 19 '10 at 3:50

+1 for the Shure A15AS, been using those for years without a hitch.

In answer to your cheaper pad question, make sure that if you use an off brand besides Shure or Audio Technica that it has a good following. I've made mistakes in my youth by chincing on cheaper gear that ended up costing me more money and time in the long run.

My 2-cents... Nick

share|improve this answer

When I worked at Electric Lady Studios, we used the Shure A15AS barrel adapters. They didn't effect the signal noticeably (except for the expected padding of course...), and are switchable, so you aren't stuck with a certain value.

A 5-pin stereo pad would be sweet, but I've never seen one before. If they make one, that'd lighten your load, but would also limit you to using it with your 418s (nice mic, btw).

Hope this helps!

Shure switchable inline attenuator

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.