Sound Design Stack Exchange is a question and answer site for sound engineers, producers, editors, and enthusiasts. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I'm certainly talking in terms of EQ. Also, I find it important to specify that embellishing voice (dialogue, VO, whichever) is a premixing duty. I usually stick with Pro Tools' RTAS EQ3 7-band EQ which is the most advanced one I have. Here's how I go about it:

I usually look for roundness around 200/300Hz, I-can't-remember-the-name around 3/4kHz and presence around 6/10kHz. I grab a maximum Q/maximum gain point and scan the whole spectrum while previewing the output. On most of the spectrum's width it'll add an unpleasant touch, but there are three points where it sounds less worse and that's how I find my spots. I then lower the gain to +6dB, my Q to 1.5 or 2, and fine-tune the gain, usually around +2 or +3dB. I'll regularly bypass the effect to ensure I'm not making it sound worse.

What way do you proceed? Talk about anything, I read a lot about the aural exciter, you might want to add reverb, a tiny delay to fatten it up, do you ever need to roll out some freqs?... whatever floats your boat, please feel free to share :)

share|improve this question
up vote 3 down vote accepted

i do very little EQ. its the basic frequencies of a particular voice i treat. it varies from voice to voice. i do dialogue for films. so i need EQs but with extreme care. the mids and lows( to give the "body" to the voice) are the most important. presence will be given according to the perspective and the nature of the shot and the space. thanks.

share|improve this answer
Great answer. I wonder how you treat severely noisy or dull recordings? What reconstructive tools do you have and use? – Utopia Aug 13 '10 at 20:11

6dB!?! GOOD GOD MAN! lol

That is a lot of EQ to bring to bear on a voice track. I can think of occasions where that might be required, but that's usually on a music mix of some sort where you're dealing with a much denser soundfield.

I usually start out by getting rid of the real loud mouth noises, and then I'll go on to EQ. I have some nice speakers at work (Blue Sky), which have a nice and flat response. I just go through and try to even it out. People are very practiced at listening to dialogue, so I prefer to just keep things "natural sounding." Whatever is required to get it there.

After that, it's usually some very gentle compression to bring out the body of the voice, and I'll leave it alone after that until I get into the actual mix. If I find I'm having any conflicts, I'll do everything I can to leave the dialogue alone (unless of course the piece calls for it to be subjugated). So, most of my fixing at that point occurs in other tracks, to preserve the dialogue as best I can.

share|improve this answer
What do you use for de-essing? Do you do any de-essing? – Utopia Aug 10 '10 at 0:51
And, how would you go about handling a peaky, tiny, harsh and no-bass voice like that of Spongebob Squarepants? – Utopia Aug 10 '10 at 0:53
@Ryan - hmm forgot about de-essing. lol i do that at the mix stage, because i prefer to see if it's going to be masked at all by anything else in the mix. if there's reasonable masking going on, i'll leave it, otherwise i'll slap a plugin on the problem dialouge track and automate that sucker. i'd handle spongebob the same way. i'm not trying to make the dialogue tracks "flat" just "smooth and even." sorry, i don't really know how to describe it beyond that. i just trust my ears and their gut reaction. – Shaun Farley Aug 10 '10 at 1:01
@Shaun I do not EQ with +6 of gain, it's only an intermediary step. I usually end up gaining specific spots at +2 or 3dB. I edited my first post to specify this ;) – Justin Huss Aug 10 '10 at 1:22
I believe in Justin.. 6db in some EQ's it's a lot.. but maybe not in digidesign ones.. They're really tough.. And don't ask me why.. but I rather cut than boost.. sound better to my ears.. :) And if you allow me to.. Massey de-esser it's great.. you have a full functional demo in his site! Try it.. the invert phase option works great in some specific situations. :) – António Porém Pires Aug 10 '10 at 21:49

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.