Take the 2-minute tour ×
Sound Design Stack Exchange is a question and answer site for sound engineers, producers, editors, and enthusiasts. It's 100% free, no registration required.

Hey all,

So last time I needed to create a goddess voice.

Now, since I did such a good job on that (thanks to birdhousesound) they want me to continue working for them and I've now got a task of making a humongous god-voice.

It's supposed to sound as big as possible.

Now, I know the recording, actor's voice and delivery has almost 90% importance in pulling it off, however here is what I've done so far:

We recorded it yesterday. The actor didn't have the bassiest voice and I recorded him at +4 percent on the word clock so it's slightly pitched down when played back at regular speed.

I plan on pitching it further, but I was wondering what else I could do in the sound design of it to make it bigger,

I was planning on trying the following ideas:

Gating a rumble effect to his voice so it turns on whenever he talks,

Using my DBX 120A bass synth to add some low-end fury to his voice,

Possibly re-micing his voice somewhere like a chamber or something (not sure where yet, my studio doesn't have a good chamber for this sort of thing),

Adding in specific sound effects or replacing his breaths out for pitched down horse breaths,

Does anyone have any other suggestions on what I could try to make this voice sound ginormous?

It's nothing too special and I can do some wacky things because it's for one of those corporate meetings and is a caper (like when a George Bush impersonator shows up to pitch an idea to big-wigs of companies).

Thanks ahead of time!!!

  • Ryan
share|improve this question
    
I also just tried this AVOX Throat plug-in - I'm really disappointed in it... Anyone have any luck using it? Maybe I just don't know how to use it correctly. –  Utopia Jul 23 '10 at 21:29
    
What about using birdhousesound's suggestion and just swap frequencies? Where "warm' before, make crispy sharp, and where "whispery" turn boomy. Just watch out for muddiness. I like the breath replacement idea, that's certainly going in my bag of tricks... –  Steve Urban Jul 23 '10 at 22:05
    
Yeah I have gotten this far: Duplicated the track. Rolled off the high-end, pitched way low and compressed as a "crush" track one of them. Then made intelligible and large with compression and a bit of pitching the second track. Mixed them together with a cool delay preset named "Vocal Doubler" and voila. I think I have a winner now, thanks. –  Utopia Jul 23 '10 at 22:18

9 Answers 9

Could be an opportunity to try out some worldizing effects a la Walter Murch. Could give the recording a more spacial, I'm everywhere kind of feel...?

share|improve this answer
    
Are you thinking about any job of Walter Murch in particular? –  Justin Huss Jul 23 '10 at 21:22
    
Cool idea! On second thought though I only have Genelecs and NS10's at my disposal to re-mic in different places, though. I don't think that would sound good, would it? Do you know what kind of speaker they re-miced Tree-Beard with? –  Utopia Jul 23 '10 at 21:26
    
Remember, if you don't have one big chamber you can just keep re-worldizing the result of your worldizing. –  Steve Urban Jul 23 '10 at 22:10
    
I love this: youtube.com/watch?v=_py6jVyOqUY –  Matt Cavanaugh Jul 23 '10 at 22:36
    
Ah @Matt! I had forgotten about that one. Good pull. –  Steve Urban Jul 23 '10 at 22:53

If you have the chance to listen to some of Blizzard entertainments Warcraft 3 voices, I suggest listening to a figure called Cenarius. When he spoke, it felt like a God that spoke. They used a very small "ghost like" reversed reverb, and added a delay and reverb.

Since it is suppose to be a deity, it is suppose to sound less human as possible so maybe have two versions of the voice, one uber pitched and one slightly pitched. Have the uber pitched voice gone through some reverb and delay (instead of the slightly pitched) that way, you will have a clear voice that people hear but a dark and low echo, Maybe even use the reverse reverb ghost voice effect thing on the very pitched voice so the build up is dark and have the voice go into the slightly pitched one as the audible part. Possibilities are endless.

share|improve this answer

Birds flying off in the distance right after he starts speaking?

Subtle reverted reverb?

Just brainstorming here... and what a storm!

share|improve this answer
    
lol I kind of like the birds flying off even if it's supposed to be a joke. –  Utopia Jul 23 '10 at 20:58
    
And what's a reverted reverb? A reversed reverb? –  Utopia Jul 23 '10 at 20:58
    
Yeah sorry. For words to be sucked in. –  Justin Huss Jul 23 '10 at 21:20
    
Ah cool I'll try it out. –  Utopia Jul 23 '10 at 21:25

I have had some success using a subtle tremelo for a God voice.

Maybe try some musical elements, harps or trumpets

But I agree that the delivery is probably 90% the job.

share|improve this answer

As well as the duplicating/reversing tracks etc, Try some heavy multiband compression on these layers and some tube goodness - hardware for the full-on effect or plugin works too. The Joe Meek EQ that comes bundled with protools is actually good for bass/warm boosts (the only thing I've ever used it for).

Some nicely placed thunder rumbles would be good for 'boom' too Doppler and heavy reflections on a reverb would be interesting too if the worldizing isn't big enough

share|improve this answer

There's a cool video here about the voices from Transformers (two videos at the bottom). They did a lot of "large" voices for the robots.

Vocal doubling often can help make something sound a lot bigger. If you copy the performance, pitch it down, and bump it a few samples forward in the timeline it can really help bolster your voice.

The DBX subharmonic synth you mentioned will probably help quite a bit as well. Love that piece.

share|improve this answer

Copy the original dialogue track, pitch shift the copy down a full octave, apply a low pass filter and then mix gently underneath the original.

If you really want to mess with it, try making another copy of the original dialogue track, pitch shift this one up an octave, then invert the phase,apply a high pass filter and mix back in to the mix.

Play around with the balance of the two copied tracks until you get the right balance and then print onto a new track.

share|improve this answer

Try using your favourite convolution reverb/convolution program (LA Convolver and Soundhack can do this on Mac for free). Load a good long, loud crowd roar as an impulse and process... Mix the result of this behind the original to taste. You could also experiment with Thunder as an impulse.

share|improve this answer

My friend recommended a technique for pitching down human voices.

His trick was to duplicate the voice track: pitch down one of the tracks to where you like and then lowpass it below near 5 kHz to remove esses and ssssshhhs, and then apply highpass to the unaltered track to regain the unpitched esses and ssshhhs.

Also some people uses resonant high pass filters to boost the lower frequencies.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.