Take the 2-minute tour ×
Sound Design Stack Exchange is a question and answer site for sound engineers, producers, editors, and enthusiasts. It's 100% free, no registration required.

Hello all,

I am curious if anyone here has experience configuring and tuning a speaker system in a movie theater for 5.1/7.1 playback. My recent projects have given me a lot of new experience with loudspeaker management and tuning for live theater, and now I am curious how a cinema would typically handle this. For instance, do the surround channels in 5.1 get sent evenly throughout the speakers on the side walls and the rear? I feel like this would be great info to have when checking a film mix.

Thanks!

~Matt

share|improve this question
add comment

1 Answer 1

Haven't set one up myself, but I know a lot about 'em!

It's a rather broad question, really. But to answer your specific request, the surround speakers are often set in an array in order to broaden the sweet spot for the audience. As such, the speakers closest to the front on each side are typically at a lower level than the speakers at the furthest rear. This allows for a smoother transition from front to back in panned fx and whatnot.

When mixing on a dub stage, the size of the room is often the same as the final listening environment: the movie theater. So if you mix on a dub stage, you're almost guaranteed to have great translation. But if you mix at home in 5.1 or 7.1, you're typically in a smaller room, and thus don't need to worry about surround arrays. But this translates rather well too, assuming your room is tuned and balanced within itself. The arrays can have a smearing effect, or make it harder to localize a source sound in a specific surround speaker, but it's either that, or have only one person in the audience who can hear the mix as it was originally intended. Better to have the full audience at 90% translation than just one person at 100%, in all actuality. (Those percentages were just guesses, btw).

share|improve this answer
    
Very helpful Chris, thank you! –  Matt Glenn May 17 '12 at 14:42
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.